A514 grade P steel material prices are expected to rebound after weak shocks next week

The heat treatment process can significantly improve the physical properties of steel, improve the compressive strength, ductility and service life of parts, and improve the hardness and wear resistance. Therefore, critical equipment parts and special tools must be quenched and tempered. The quenching and tempering treatment can also improve the production and processing performance of the A514 grade P steel material product workpiece, thereby improving the production efficiency and production processing quality.

BBNsteel A514 grade P steel material medium plate product discount: 17.5*2850*8450, 18.5*1940*12100, 18*2770*4000, 19.5*2980*12050, 20*3000*8570, 19.5*1970*4000, 18.5*1640*8450, 19.5*1490*8500, 19*2580*4700, 20*3200*9000, 20*1600*7740, 18.5*1850*14050, 19.5*1910*6300, 21*1630*6000, 22*1300*10000, 19*2640*7810, 21*2650*7500, 21*1920*8220, 22*1380*7650, 21*1920*9270, 20.5*1590*6000, 21*2980*6460.

20 # material is a high-quality low-carbon carbon steel, cold-extruded, carburized and hardened steel. A514 grade P steel material, 20 # material has low strength, good toughness, plasticity and good weldability. Chemical composition of 20 # round steel bar: C: 0.17 ~ 0.23, Si: 0.17 ~ 0.37, Mn: 0.35 ~ 0.65, S: ≤0.035, P: ≤0.035, Cr: ≤0.25, Ni: ≤0.30, Cu: ≤0.25. 20# carbon steel mechanical properties: Shear strength 275 ~ 392MPa, Tensile strength is 253 ~ 500MPa, elongation min. 25%.

Myanmar's demand for A514 grade P steel material steel products is likely to exceed 3 million tons in 2020 and 5 million tons by 2025, according to seaisi. However, Myanmar's producers are unable to meet domestic demand, so the country's steel products are more dependent on imports. In 2019, Myanmar imported more than 1.9 million tons of A514 grade P steel material finished steel, including 57% of long products, 13% of uncoated hot-rolled and cold-rolled flat products, and 30% of coated steel. In order to reduce its dependence on imports, Myanmar plans to increase its steel production capacity by building and expanding steel mills.