Aboundant EN steel grade S275J2 plates stock resources for sale

S45C steel plate chemical composition: C 0.42~0.48, Si 0.15~0.35, Mn 0.60~0.90, P≤0.030, S≤0.035, Cu≤0.30, Ni≤0.20, Cr≤0.20Mechanical properties of EN steel grade S275J2 plates productTensile strength>686MPaYield strength>490MPaElongation δ5>17%Shrinkage ψ>45%Impact toughness value>78J/cm2The hardness is 201~269HB.

Q245R boiler steel plate introduction: Q is the first letter of "Qu" Chinese Pinyin; Number 245 is the yield strength value; R: is the first character of "Rong" Chinese Pinyin. Q245R steel is a special plate for pressure vessels and boilers with a yield strength of 245MPa. It has outstanding mechanical properties and processability. If you have special requirements, our company can supply Z15, Z25, Z35 and other Z performance tests.

X-rays or γ-rays are projected on the surface of the steel plate, and rubber can be placed on the other side of the steel plate. Since the radiation propagates through the steel plate and is absorbed, the intensity is different due to the presence or absence of defects, so the film can record the shape and position of the defects. This EN steel grade S275J2 plates method is sensitive to the detection of common steel plate defects such as slag inclusions, porosity and pores. The disadvantage is that it is difficult to find the specific depth of the defect and it is not easy to find cracks.

Since its establishment, the company has participated in several key railway and highway projects. After years of development, the company’s EN steel grade S275J2 plates domestic market has been exported to more than a dozen provinces and cities including Kunming, Shenzhen, Hunan, Sichuan, Shanghai, Nanjing, Heihe, Jilin, Inner Mongolia, and Xinjiang . International trade is exported to Kazakhstan, South Korea, Vietnam, South Africa and many other countries, and has been well received by customers.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.