Export great EN steel grade S460QL1 material to Malaysia

Based on the EN steel grade S460QL1 material steel trade, the company mainly deals in Baosteel products: color coating, zinc plating, fingerprint resistance, cold rolling, hot rolling, pickling, electrical steel and other products, and can order the futures of the company's products on behalf of manufacturers. It has established cooperative relations with more than 2000 foreign customers. At the same time, it also operates a variety of products of related iron and steel enterprises. Annual sales of EN steel grade S460QL1 material steel 3.6 million tons, standing stock of 400000 tons, has developed more than 10000 users. The company has a first-class marketing service system, strong storage and transportation capacity and supporting supply, cutting distribution capacity, and gradually build it into an important marketing channel.

SA299GrB steel plates with a thickness of less than or equal to 50mm are usually delivered in the rolled state, and can also be delivered in the state of normalizing, stress relief, or normalizing plus stress relief. Steel plates with a thickness greater than 50mm should be normalized heat treatment. It can also add flaw detection standard requirements, flaw detection level requirements, alloy element composition control requirements, etc. according to needs.

Q345B material is a low carbon alloy steel grade with good overall performance, low temperature performance, cold stamping performance, welding performance and machinability. Q345 serues steel is widely used in bridges, vehicles, ships, buildings, pressure vessels. Q represents the yield of this material, and the number 345 refers to the yield value of this material, which is around 345MPa. As the thickness of the material increases, its yield value decreases.

Our company has the ability to produce all kinds of steel structure parts. At the same time, we can design drawings according to the requirements of customers, and process according to the drawings. EN steel grade S460QL1 material Heat treatment services - such as annealing, normalizing, quenching, tempering, quenching and tempering, solution treatment, etc. We can also heat treat according to customer's EN steel grade S460QL1 material requirements.

Chemical composition of 42CrMo seamless steel pipe: C: 0.38-0.45, Si: 0.17-0.37, Mn: 0.50-0.80, Cr: 0.90-1.20, Mo: 0.15-0.25, V: 0.15-0.30. Mechanical properties of 42CrMo seamless steel pipe: tensile strength: 1080 MPa, yield strength: 930 MPa, elongation after fracture: 12%, reduction of area: 45%, impact energy: 63J. Due to the effect of carbon and chromium content, EN steel grade S460QL1 material, 42CrMo seamless steel pipe has better strength and hardenability, higher fatigue strength and resistance to multiple impact after quenching and tempering, good impact toughness at low temperature and no obvious temper brittleness. It is generally used after quenching and tempering.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.