News

News

• Attentions in machining JIS carbon steel SM490YB CS plate

  2021-01-06

  It is very important for an enterprise to have a sound after-sales service system, which not only ensures the normal outflow and inflow of the company's products, but also improves the trust of the company's products in the hearts of customers.

  More >
• Will JIS carbon steel SM490YA CS plate prices continue to rise

  2021-01-06

  Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the JIS carbon steel SM490YA CS plate project. In response process of customer serv

  More >
• Straightening technology of JIS carbon steel SM570 CS plate

  2021-01-06

  Weathering steel plate is a kind of natural weathering steel plate with atmospheric corrosion resistance, characteristic corrosion and oxidation, which has been obtained in many fields. The common basic properties and the state of various weathering steel

  More >
• What is the trend of JIS carbon steel SS400 CS plate prices this winter

  2021-01-06

  Generally, the steel plates for boiler and pressure are divided into categories. A516 gr60 carbon steel plates have a maximum thickness that varies on the capacity. The tensile strength, elongation, yield strength, and hardness are the mechanical properti

  More >
• Characteristics of Q690E carbon steel material production

  2021-01-06

  4140 steel is alloy structural steel, and its technical standard is ASTM A29/A29M. It belongs to ultra-high strength steel. Q690E carbon steel material, 4140 steel has high strength and toughness, good hardenability, no obvious temper brittleness, high fa

  More >
• The chemical composition and mechanical properties requirements on Q460E carbon steel material

  2021-01-06

  Penetration testing technology is only suitable for detecting surface defects. It uses penetrant to apply on the surface of the Q460E carbon steel material steel plate, then wipes the excess penetrant with the cleaning solution, and then smears the develo

  More >
• Is numerical control Q390D carbon steel material cutting good

  2021-01-06

  The pre cooling direct quenching and low temperature tempering of wear-resistant composite plate can reduce the quenching deformation of the workpiece, and the residual austenite content in the carburized layer can also be slightly reduced. The surface ha

  More >
• The price of Q235D carbon steel material in northwest Europe is uncertain

  2021-01-06

  The deoxidization process of Q345R boiler vessel plate if the type and amount of deoxidizer are controlled to make a certain amount of oxygen remain in the Q235D carbon steel material steel, when sufficient amount of strong oxidant is added to make the st

  More >
• Machining Q235C carbon steel material Hot Rolled Steel

  2021-01-06

  The main reference for structural design of steel structure engineering is the static and dynamic characteristics of the steel used under various actions, such as elasticity, plasticity, strength, toughness, fatigue and other mechanical properties. Theref

  More >
• weld Q235A carbon steel material hot rolled plate

  2021-01-06

  Considering the large workload of allocation and transportion for our steel materials, we have built special shipping department, and make it independent form transportation department. The transportation department is in charge of transporting steel mate

  More >
• What is price of Q690D carbon steel material in China

  2021-01-06

  Flat steel is a kind of steel with rectangular cross-section and blunt edges at the edges and corners. It is usually 12-300 mm wide and 3-60 mm thick. Compared with Q690D carbon steel material ordinary steel plate, the utilization rate of flat steel is in

  More >
• China price tendency of Q690C carbon steel material

  2021-01-06

  The Performance requirements of low alloy structural steel, Q690C carbon steel material:(1) High strength: generally, the yield strength is above 300Mpa.(2) High toughness: the elongation is required to be 15% - 20%, and the room temperature impact toughn

  More >
• Flame cutting is suitable for medium and thick Q460C carbon steel material cutting

  2021-01-06

  Q460C carbon steel material, High-strength wear-resistant plates have outstanding performance advantages. First of all, the high-strength wear-resistant plates get their name because their wear resistance is very good, and the degree of wear will not be p

  More >
• The surface quality of Q345C carbon steel material shall meet the requirements

  2021-01-06

  What is the specific use of Q345C carbon steel material, hot rolled plate in daily life? First of all, hot rolled plate is used in bridge, vehicle structure, frame and other fields to play a role of bearing pressure. Secondly, high pressure boiler vessels

  More >
• Q345B carbon steel material refining

  2021-01-06

  The Q345B carbon steel material steel making furnace can only be used as primary refining, and the refining needs to be completed in the refining equipment outside the furnace, which is also called secondary refining. It is mainly through decarburization,

  More >
• The iron oxide skin on surface of Q345D carbon steel material

  2021-01-06

  Magnetic particle flaw detection is only suitable for detecting surface defects, which means that by laying magnetic powder on the surface of the equipment and using its aggregate shape on the surface defects of the magnetic material equipment to determin

  More >
• Q235B carbon steel material market forecast this week

  2021-01-06

  Looking to the future, our company will make its main business more competitive while carrying out diversified, extensive, green and harmonious development modes, so as to be the most competitive stainless steel Q235B carbon steel material producer in the

  More >
• The plasma cutting method of SM490A carbon steel material cutting

  2021-01-06

  What are the general uses of SM490A carbon steel material, low alloy steel plate? First, low alloy steel plate can be used as bridge steel plate, because it has strong bearing capacity. The bridge’s daily traffic flow is very large, so it must h

  More >
• SM400C carbon steel material surface quality should be consistent with the provisions

  2021-01-06

  Our team is a dynamic, but also mature and steady team. The talents are made of different ages. There are experienced ones, and also creative ones, that also makes our company culture diversified. We have complete department structure, to make the whole w

  More >
• Steel mill inventory of SM520C carbon steel material increased

  2021-01-06

  The pre cooling direct quenching and low temperature tempering of wear-resistant composite plate can reduce the quenching deformation of the workpiece, and the residual austenite content in the carburized layer can also be slightly reduced. The surface ha

  More >
• Cutting method of SM490C carbon steel material

  2021-01-06

  Corrosion resistant steel is a kind of stainless steel, which can resist corrosion in some strong corrosive media. Stainless steel can only resist corrosion in air or weak medium. Stainless steel is not necessarily corrosion resistant, corrosion-resistant

  More >
• Technical data of SM400B carbon steel material

  2021-01-06

  The visual inspection (VI) or visual detection method is to scan the surface of the steel plate through a machine vision system (CCD line camera), convert the captured target into an image signal, and send it to a dedicated image SM400B carbon steel mater

  More >
• The welding of SM520B carbon steel material

  2021-01-06

  20G steel is a common carbon steel used to manufacture boilers. The performance of 20G steel is basically the same as that of 20# steel. The requirements for impact toughness, strain aging impact value and cold bending of 20G steel are increased. The yiel

  More >
• Laser cutting SM490B carbon steel material

  2021-01-06

  Compared with SM490B carbon steel material, ordinary steel plate, ship plate has better resistance to wind and wave. In the ocean, there are often big winds and big waves. If the performance advantage of ship plate is not prominent, it is easy to be damag

  More >
• Is numerical control SM400A carbon steel material cutting good

  2021-01-06

  Our company's business departments are a group of excellent and hard-working employees, who constantly carry out knowledge updating and steel knowledge training every day, only to provide better and professional services to customers.15CrMo alloy pla

  More >