Large stock SA633 Gr C carbon steel plate sheet from China factory

The company has superior geographical position and convenient transportation. Our main steel products are: low alloy high-strength plate, carbon structural plate, alloy structural plate, bridge plate, building structural plate, shipbuilding and offshore oil production platform plate, boiler and pressure vessel plate, pipeline plate, weathering steel plate, SA633 Gr C carbon steel plate sheet, etc.. In line with the principle of "not striving for the lowest price, but the best quality", the company wholeheartedly provides high-quality steel products and sincere services for users at home and abroad.

The chemical composition difference between SA633 Gr C carbon steel plate sheet, Q235B and 20# steel is as follows: The chemical composition of 20# steel: C: 0.17-0.23%, Si: 0.17-0.37%, Mn: 0.35-0.65%, Cr: ≤ 0.25%, Ni: ≤ 0.30%, Cu: ≤ 0.25%. Chemical composition of Q235B steel: C: ≤ 0.20%, Si: ≤ 0.35%, Mn: ≤ 1.40%, P: ≤ 0.045%, S: ≤ 0.045%. The difference of mechanical properties between SA633 Gr C carbon steel plate sheet, Q235B and 20# steel is as follows: The mechanical properties of 20# steel: tensile strength 410 MPa; yield strength 245 MPa; elongation after fracture: 25; reduction of area: 55; no impact. Q235B steel mechanical properties: tensile strength 370-500 Mpa; yield strength: ≥ 235 Mpa; elongation after fracture: 25; impact absorption energy: 27J.

The steel such as SA633 Gr C carbon steel plate sheet delivered in the hot-rolled state has a certain degree of corrosion resistance due to the high temperature, so it can be stored in the open air. However, this layer of oxide scale also makes the hot-rolled steel surface rough and the size fluctuates greatly. Therefore, the steel with smooth surface, accurate size and good mechanical properties is required to be produced by using hot-rolled semi-finished products or finished products as raw materials and then cold rolling.

Hot-rolled steel sheet / cold-rolled steel sheet: Steel ingots or slabs are difficult to deform at normal temperature and difficult to process. They need to be heated to 1100 ° C to 1250 ° C for rolling. This SA633 Gr C carbon steel plate sheet rolling process is called hot rolling. Rolling at room temperature is generally understood as cold rolling. However, from the point of view of metallurgy, the boundary between hot rolling and cold rolling should be distinguished by the temperature of metal recrystallization, that is, rolling below the recrystallization temperature is cold rolling; Rolling above the recrystallization temperature is hot rolling.