Market price forecast of EN steel grade S355JR plates

The company adheres to the customer philosophy of "customer first, pursuit of excellence". With the service tenet of "low price, excellent quality, fast transportation and constant commitment", we are committed to providing EN steel grade S355JR plates high quality and timely steel products and services for steel users all over the world. And created a good customer reputation. The main products of the company are section steel, steel pipe, thin plate, rolling plate, medium and thick plate, etc.

S355NL normalized steel has different impact energy requirement for impact tests at different temperature environment. S355NL plate shall be done impacting test in longitudinal direction under -50℃ with the minimum energy 27J. When customers request done charpy_V notch test under -20℃,then the impacting energy shall be above 47J. For the transverse direction,the engery shall be above 16J under the temperature -50℃. The EN steel grade S355JR plates, steel Grade S355NL making process shall according to EN10025-1.

Just as EN steel grade S355JR plates, the boiler steel plate also has strict control of chemical composition for the material, especially harmful elements such as phosphorus and sulfur, and residual elements such as chromium, nickel, and copper; during smelting, good deoxidation and removal of non-metallic inclusions should be carried out to ensure good quality, plasticity and toughness. The organizational structure requires uniformity, and the grain size is controlled within a certain range; there are also strict requirements for surface quality and internal defects. In addition, the boiler steel plate mechanical properties at room temperature and high temperature must be guaranteed.

In the production process of the ironmaking process, the moisture content and air temperature of the ironmaking blast furnace blast have a direct impact on the fuel consumption and fuel consumption structure of the ironmaking process. Blast furnace blast dehumidification is to remove the moisture in the blast furnace blast, eliminate the adverse effects of atmospheric humidity fluctuations on the blast furnace forward movement, and create stable operating conditions for the fans.

"We can supply EN steel grade S355JR plates, hot rolled pressure vessel plate available sizeThickness from 5mm to 150mm Width: from 1,500mm to 2,500mm Length: from 6,000mm to 12,000mmFor plates thinner than 40mm normally supply as rolled. Plates above 40mm thick are normalised.Technical conditions: Ultrasonic tested as per SA 578 or any other as per requirement ; MTC acc to EN 10204 / 3.2; Charpy Impact tested at -20/-46 DegC.; Furnace Normalised."

Compared with other fast-moving consumer goods, steel consumption is obviously different, with a wide range of use and a long service life. Therefore, the quality and service of steel materials are particularly important. Service is always one of our top concerns, especially after-sales service. We have mature after-sales service team, and can help you solve problems professionally during application of the steel materials.