Q345B carbon steel plate sheet construction material price per ton

After heat treatment and cold drawing hardening, 65Mn steel has higher strength, certain toughness and plasticity; under the same surface state and complete hardening, the fatigue limit is equivalent to that of alloy springs. However, due to poor hardenability, it is mainly used for springs of Q345B carbon steel plate sheet smaller sizes, such as pressure regulating springs, force measuring springs, round and square spiral springs on general machinery or drawn into steel wires as springs on small machinery.

13CrMo4-5 seamless pipe is a kind of pressure resistant seamless pipe in accordance with the European standard EN 10216-2. The chemical composition of 13CrMo4-5 seamless pipe is C 0.10-0.17, Si ≤ 0.35, Mn 0.40-0.70, P ≤ 0.025, S ≤ 0.020, Cr 0.70-1.15, Ni ≤ 0.30, Mo 0.40-0.60, Al ≤ 0.04, Cu ≤ 0.03. Mechanical properties of 13CrMo4-5 seamless pipe: tensile strength: 440-590 MPa, yield strength: ≥ 290 MPa, elongation: ≥ 22%, impact energy: ≥ 40J. Q345B carbon steel plate sheet, 13CrMo4-5 seamless pipe is used in petroleum, chemical industry, power station, boiler and so on industries.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.