S355NL carbon steel plate sheet casting foundry

Online Industrial Metal Supply, S355NL carbon steel plate sheet Direct Factory Price 55*2500*12000, 55*2500*12000, 56*1890*12000, 50*2600*7940, 68*2300*3500, 77*1300*12200, 55*1600*6000, 50*1700*6000, 81*2010*3000, 70*2500*12000, 80*2020*7932, 68*3030*11300, 80*1150*3950, 70*2500*12000, 65*2500*10350, 80*1655*7260, 80*1000*3950, 90*3120*9800, 80*2500*12000, 120*3030*7400, 85*2800*3400, 100*2400*10000, 140*2300*11500, 148*2780*6930.

Ordinary medium and thick steel plate S355NL carbon steel plate sheet is a kind of deoxidized steel. The oxygen content of the steel liquid is relatively high, and a lot of gas will be produced during the production process to make the steel liquid boil, so it is also called boiling steel. Advantages: this kind of steel plate has smooth surface, good quality and easy processing. Because this kind of steel plate has no concentrated shrinkage cavity, the amount of deoxidizer is very small and the price is lower than other steel plates.

The company's ESP thin gauge is down to 0.6mm. The thinner the thickness of the S355NL carbon steel plate sheet, hot rolled steel product, the more difficult it is to roll. The thickness will encounter increased load, severe vibration of the rolling mill, difficult shape control, and fluttering of the head during the downdraft. There are many problems such as difficulty in getting bite, which limit the thinnest size that can be rolled by hot rolling. At present, the thinnest gauge of conventional rolling line is 1.2mm, and the thinnest gauge of CSP production line is about 1.0mm. The successful rolling of 0.6mm hot rolled steel product is a milestone in hot rolled steel strip technology.

S355NL carbon steel plate sheet, Special thick steel plate cutting needs to be preheated in advance. Some steel plates are prone to cracks after entering the cutting process, sometimes that is because the temperature is too low, and it is necessary to perform pre-heat treatment in advance for such cases. The staff can preheat the steel plates first, so that the temperature of the steel plates will gradually increase, and then the flame gun can be used to cut. The probability of cracks in the cut material is very low, and the quality of the steel plate is also guaranteed.