S420NL carbon steel material The company joins 2020.08 industry association

BEBON Iron & Steel has fully passed the ISO9001 quality system certification, marine steel has passed 9 countries' classification societies, and construction steel has obtained the CE Lloyd's CE Mark certification. The main body of steel passed ISO14001 environmental management system certification and OHSAS18001 occupational health and safety management system certification. The main production processes and technical equipment of the enterprise have reached the international advanced level, the comprehensive competitiveness has entered the international advanced ranks, and the international influence has been significantly enhanced.

Our company's business departments are a group of excellent and hard-working employees, who constantly carry out knowledge updating and steel knowledge training every day, only to provide better and professional services to customers.

S420NL carbon steel material,Main characteristics of 12Cr1MoV Steel: compared with 12CrMoV steel, 12Cr1MoV steel has higher oxidation resistance and thermal strength. The creep limit of 12Cr1MoV steel is very close to the endurance strength value, and it has high plasticity under the condition of endurance tension; the processability and weldability of 12Cr1MoV steel are good, but it needs to be preheated to 300 ℃ before welding, and stress removal treatment after welding. 12Cr1MoV steel is widely used in Superheater, header and main steam pipe of high pressure, ultra-high pressure and subcritical utility boiler.

S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.

In 2013, one of our clients in Korea purchased 890 tons Q345B square tube from us for one building construction project. Our clients required no burr in the side of the tube, we finally produce the goods with great condition and +/-0.25mm tolerance for wall thickness, which is a very great tolerance with customers’ required size. Our square tube full available range is 2-16mm for wall thickness, and 40-500mm for width. In addition, our Q/C department will seriously control all of the process of every order.S420NL carbon steel material

Heat treatment is a very important process to improve the performance of metal materials. The process of heating, heat preservation and cooling the steel in solid state to obtain the required structure and properties.

S420NL carbon steel material,We specialize in the production and sale of steel products. We have many customers from all over the world. Our products have strict quality inspection departments, so we have absolute quality and technical advantages. Good promotion system, with advanced business philosophy, create development space, enhance the value of employees, improve the quality of life as the mission. Pursuing green procurement, energy conservation and consumption reduction.