S460QL1 carbon steel material HIC plate

S460QL1 carbon steel material,At the same time of doing well in production and operation, Yunnan company focused on completing the four phases of technical transformation construction projects, realizing industrial upgrading, improving equipment level, and laying a good foundation for the future development of the company. In the technological transformation project, pollution control facilities have been built synchronously, and a large number of comprehensive utilization projects, such as comprehensive sewage treatment and recycling project, blast furnace gas waste heat and residual pressure power generation, have been invested and constructed.

S460QL1 carbon steel material,S355J2 is a low-alloy high-strength steel, which can be treated to meet the requirements of Z-15, Z-25, Z-35 and level I, level II and level III flaw detection.The extension grades of S355J2 are S355J2, S355J2-Z35 and S355J2 + N-Z35. On the basis of S355J2, S355J2-Z35 increases the requirement of S355J2 steel plate thickness direction performance, namely Z-direction performance. S355J2 + N-Z35 is a heat treatment process which increases Z-direction properties and normalizing rolling (or normalizing).

Main characteristics of 12Cr1MoV Steel: compared with 12CrMoV steel, 12Cr1MoV steel has higher oxidation resistance and thermal strength. The creep limit of 12Cr1MoV steel is very close to the endurance strength value, and it has high plasticity under the condition of endurance tension; the processability and weldability of 12Cr1MoV steel are good, but it needs to be preheated to 300 ℃ before welding, and stress removal treatment after welding. 12Cr1MoV steel is widely used in Superheater, header and main steam pipe of high pressure, ultra-high pressure and subcritical utility boiler.

Magnetic particle flaw detection is only suitable for detecting surface defects, which means that by laying magnetic powder on the surface of the equipment and using its aggregate shape on the surface defects of the magnetic material equipment to determine the position, size and shape of the defect. This method has a relatively low cost and is easy for steel production enterprises to adopt in batches. However, for special steel profiles with deeper thickness, whether this method is used to detect hidden defects is yet to be verified.S460QL1 carbon steel material

S460QL1 carbon steel material,ASTM A537 class 1 boiler plate is pressure vessel steel. A537 class 1 boiler plate chemical elements include C, Si, Mn, P, S, Mo, Ni, etc. Among them, the carbon content is 0.24 max., Si content is 0.13-0.55%, Mn content is 0.92-1.72%, the max. contents for both P and S are 0.035%, the Mo content is 0.09% max, and the Ni content is 0.38% max. A537 class 1 boiler plate properties: A537 class 1 boiler plate tensile strength is 450-585 MPa, min. yield strength is 310 MPa, and min. elongation in 2 in.(50mm) is 18%.

The company has a professional after-sales service team and good after-sales service reputation, providing full and uninterrupted after-sales service, to ensure timely and rapid solution to customer problems. The company is recognized as a 5-star brand of market quality cost performance and customer satisfaction by Market Research Center, and rated as "AAA credit enterprise of enterprise credit evaluation", and also a leading steel producer and service provider in the world.S460QL1 carbon steel material