SA572 grade 42 carbon steel plate sheet 7cm steel specification

The effect of nitrogen (N) on the properties of SA572 grade 42 carbon steel plate sheet and so on steel is similar to that of carbon and phosphorus. With the increase of nitrogen content, the strength of steel can be significantly improved, especially the plasticity, especially toughness, and the weldability will be decreased, and the cold brittleness will be intensified. At the same time, aging tendency, cold brittleness and hot brittleness will be increased, which will damage the weldability and cold bending property of steel. Therefore, the nitrogen content in SA572 grade 42 carbon steel plate sheet and so on steel should be reduced and limited as much as possible. Generally, nitrogen content should not be higher than 0.018%.

The company has created a group of professional staff with good market awareness and service spirit. More than 90% of the company's employees have college education and more than 3 years of work experience in the industry. Our company has a group of senior professionals engaged in international cargo transportation. Through the implementation of modern centralized control management of the SA572 grade 42 carbon steel plate sheet whole system computer network, we can effectively control and guarantee the daily operation of the SA572 grade 42 carbon steel plate sheet.

Q690E high strength steel chemical composition: C: 0.08-0.15, Si: 0.17-0.37, Mn: 0.40-0.70, S: ≤0.035, P: ≤0.035, Cr: 0.30～0.60, Cu: ≤0.030, Ni: ≤0.030, V: 0.15-0.30, Mo: 0.25-0.35 Q690E mechanical properties: Tensile strength σb (MPa): ≥440 Yield strength σs (MPa): ≥225 Elongation δ5 (%): ≥22 Reduction of area ψ (%): ≥50 Impact energy Akv (J): ≥78

The carbon content of SA572 grade 42 carbon steel plate sheet, hot rolled steel plate is slightly higher than that of cold rolled steel plate. Hot rolled steel plate has low hardness, easy processing and good ductility. Cold rolled steel plate has high hardness and is difficult to process, but it is not easy to deform and has high strength. The strength of hot-rolled steel plate is relatively low, the surface quality (oxidation finish) is low, but the plasticity is good, and it is generally medium thick plate.