SA633 grade E carbon steel plate sheet stock keeper and supplier

The steel plate for water conservancy and power generation is used for ring seat, motor support structure, ship lock gate and discharge chute volute of large water conservancy generating units; the representative steel grades are S500Q, S550Q, SA516, etc., which require flaw detection and have Z-direction performance requirements; the main specifications are thickness of 120mm, 180mm, 200mm, 215mm, 270mm, and the maximum width is 4400mm. The representative steel grades of wind power steel plates include Q345E, Q690E, SA633 grade E carbon steel plate sheet, etc.; the main specifications are thickness of 80mm, 100mm, 110mm, 120mm, 140mm, 160mm, 180mm, 200mm, 240mm, 260mm, 280mm, 300mm, and the width is more than 2500mm.

Vanadium element (V element) can refine grains in ordinary low carbon alloy steel, improve the strength and yield ratio and low temperature characteristics after normalizing, and improve the welding performance of steel, SA633 grade E carbon steel plate sheet included. Vanadium element (V element) is often used in combination with manganese, chromium, molybdenum, tungsten and other elements in structural steel because of its low hardenability under general heat treatment conditions. Vanadium in quenched and tempered steel is mainly to improve the strength and yield ratio of steel, refine the grain size, and pick up the overheating sensitivity.

Flat steel is a kind of steel with rectangular cross-section and blunt edges at the edges and corners. It is usually 12-300 mm wide and 3-60 mm thick. Compared with SA633 grade E carbon steel plate sheet ordinary steel plate, the utilization rate of flat steel is increased by one to five percentage points. Moreover, flat steel can be produced with fixed thickness, width and length according to the user's requirements, which saves the cutting process for users, reduces the consumption of labor and materials, and also reduces the processing loss of raw materials, saving time, labor and material.