The hot rolling process of SA514 grade E steel material
A514 gr.B steel coil chemical composition (melting analysis)%C: 0.12-0.21, Si: 0.20-0.35, Mn: 0.70-1.00, P max.: 0.035, S max.: 0.035, B max.: 0.005, Cr: 0.40-0.65, Mo: 0.15-0.25, V: 0.03-0.08, Ti: 0.01-0.03The mechanical properties in thickness (mm)T≤65Yield strength (≥Mpa): 690Tensile strength (Mpa):760-895Elongation in ≥, %: 18
South Korean SA514 grade E steel material steel industry said that the slowdown in economic growth superimposed on the impact of the epidemic, steel demand weakened, exports were sluggish, enterprises are facing huge operating pressure. Due to the delay in the resumption of work of Chinese SA514 grade E steel material steel enterprises, the steel inventory is growing rapidly. According to statistics, China's steel circulation inventory reached 23.75 million tons in February, the highest since 2006, with an estimated total inventory of 33.45 million tons.
In view of the characteristics of container transportation, such as high added value, low cargo damage and short time, our company takes more consideration of port collection and distribution conditions, port facilities, flight density and route coverage when choosing ports. For the convenience of customers, as well as the safety of goods.
In actual processing applications, the processing SA514 grade E steel material thickness of flame cutting ranges from 6 to 200 mm, and the SA514 grade E steel material cutting thickness can even reach 350 mm by replacing the air pipe and cutting torch nozzle. In order to better improve the cutting quality, the related process parameters will be slightly different when using flame cutting for materials of different thickness. The verticality of the cutting surface processed by the CNC flame cutting machine is generally high, and the slope can be controlled below 2-3°. The characteristic is that flame cutting performs better when cutting SA514 grade E steel material with a certain thickness above 10mm.