The production process of SM490C carbon steel material

Our quality control department will do inspection for details of the steel materials SM490C carbon steel material before delivery. We would invite the customer side to attend the inspection together. If they can not come, we will also take rich pictures for them to check. Meanwhile, we will publish inspection report and send them the PDF version. Besides, we accept any third party inspection such as SGS, BV, etc. And our quality control department will support the third party to inspect the steel materials smoothly and try our best to deliver the qualified steel materials to customers earlier.

After heat treatment and cold drawing hardening, 65Mn steel has higher strength, certain toughness and plasticity; under the same surface state and complete hardening, the fatigue limit is equivalent to that of alloy springs. However, due to poor hardenability, it is mainly used for springs of SM490C carbon steel material smaller sizes, such as pressure regulating springs, force measuring springs, round and square spiral springs on general machinery or drawn into steel wires as springs on small machinery.

Weathering steel generally adopts the process route of fine material into the furnace-smelting (converter, electric furnace-microalloying treatment-argon blowing-LF refining-low superheat continuous casting (feeding rare earth wire)-controlled rolling and cooling. The scrap steel is added into the furnace together with the charge, and smelted according to the conventional process. After the SM490C carbon steel material steel is tapped, deoxidizers and alloys are added. After the molten steel is treated with argon blowing, the molten steel is cast. By adding rare earth elements to the steel, the SM490C carbon steel material weathering steel is purified and the content of inclusions is greatly reduced.

Chemical composition of SM490C carbon steel material, Q345D steel plate: C: ≤0.18; Si: ≤0.50; Mn: ≤1.70; P: ≤0.030; S: ≤0.025; Nb: ≤0.07; V: ≤0.15; Ti: ≤0.20; Cr: ≤0.30; Ni: ≤0.50; Cu: ≤0.30; N: ≤0.012; Mo: ≤0.10; Als: ≥0.015. Yield strength (MPa) of Q345D steel plate: ≤16mm: ≥345; 16-40mm: ≥335; 40-63mm: ≥325; 63-80mm: ≥315; 80-100mm: ≥305; 100-150mm: ≥285; 150-200mm: ≥275; 200-250: ≥275; 250-400: ≥265. Tensile strength of Q345D low alloy steel: 450-630(MPa). Elongation: ≥21. Impact test: -20 ℃: ≥34.

BBN company has steel plates production workshops and warehouses with a total area of more than 500,000 square meters, and the total inventory of various types of steel exceeds 1 million tons. Relying on world-leading processing equipment and storage facilities, the company has strong steel production and processing capabilities, comprehensive logistics and logistics services, ensuring that it can efficiently complete more than 1 million tons of hot rolled plates processing business each year.

The strip steel thickness is generally below 6mm, which is convenient for crimping and processing. You should choose the SM490C carbon steel material, strip steel specifications according to your own purposes. The specifications and materials used for different purposes are different, so you must confirm it before buying. It is best to ask professionals to give advice before purchasing strip steel, and purchase the specifications and types you need according to the corresponding requirements.