What are the well-know ten SA573 Gr 70 carbon steel plate sheet hot rolled plates mills in Qatar

The development SA573 Gr 70 carbon steel plate sheet of the company comes from the resource advantage, service advantage, logistics advantage and brand advantage established over the years, and it is also inseparable from the full support of new and old customers. We will uphold the support of all sectors of society, actively provide users with SA573 Gr 70 carbon steel plate sheet high-quality and efficient services, work together for win-win, and create a better tomorrow!

ASTM A285 is an ordinary carbon steel used for fusion welding of pressure vessel equipment, such as SA573 Gr 70 carbon steel plate sheet boilers, storage tanks, heat exchangers, etc. The tensile strength of the three steel grades (Grade A, Grade B, and Grade C) ranges from 310-515Mpa, and ASTM A285 steel plates are usually delivered in the rolled state. According to user requirements, SA573 Gr 70 carbon steel plate sheet is produced by processes such as compaction, semi-compaction, edge sealing and boiling water.

SA573 Gr 70 carbon steel plate sheet, 20CrMo alloy steel plate has high hardenability, no temper brittleness, good weldability, little tendency of cold cracking, good machinability and cold strain plasticity. 20CrMo alloy steel plate is generally used in the state of quenching and tempering or carburizing and quenching. 20CrMo alloy steel plate is used to manufacture high-pressure pipes, fasteners and carburized parts, such as gears and shafts, working in non corrosive medium and medium containing mixture of nitrogen and hydrogen under 250 ℃.

After the steel plate is produced from the original factory, it will pass through a series of transportation and storage links and then be delivered to the processing workshop. During this period of time, the steel plate surface will contact with the air continuously, which will inevitably produce a layer of oxide skin. The oxide skin is a difficulty in the treatment process. It has high melting point, is not easy to burn and dissolve, increases preheating time, reduces cutting speed. Therefore, the surface of the SA573 Gr 70 carbon steel plate sheet plate should be derusted before cutting.

P235GH steel material number under EN10028-2:2003 standard is 1.0345. This steel is a European pressure vessel steel. P235GH Mechanical properties: Tensile strength σb (350 ~ 480 MPa); Yield strength σs(215 MPa min.); Elongation ≥25%; Brinell hardness ≤105 ~ 140. SA573 Gr 70 carbon steel plate sheet, P235GH steel chemical composition (mass fraction,%): ≤0.16 C; ≤0.35 Si; 0.60 ~ 1.20 Mn; ≤0.025 P; ≤0.010 S; ≤0.30 Cr; ≤0.30 Ni; ≤0.30 Cu; ≤0.08 Mo; ≤0.02 V; ≤0.02 Nb; ≤0.012 N; ≤0.020 Al; ≤0.03 Ti.

It is a modern high-tech professional enterprise integrating scientific research, SA573 Gr 70 carbon steel plate sheet production and sales. The company is mainly engaged in the manufacture, installation and commissioning of boiler and pressure vessel, chemical, metallurgical, petroleum and other equipment, as well as SA573 Gr 70 carbon steel plate sheet process technology development, technology transfer and related technical consulting and technical services.

We have a professional after-sales service team, the company has developed a clear service process and service standards, after-sales service team members strictly perform after-sales procedures, comply with service standards. The most important thing is that we have set up the correct concept of after-sales service, "customer first, sincere service for users".