Where the JIS SM490B plates is used

The company is a large JIS SM490B plates steel supplier and exporter specializing in steel coil, steel plate, steel tube and section steel. The company has always put service and quality first, offered reasonable price, taken small profits and quick turnover as the principle, honest and trustworthy as the purpose. The success of the company is not only the hard work and wisdom of all the employees of the company, but also the deep love of our customers. We will continue to achieve new leaps and create greater brilliance of the JIS SM490B plates enterprise, and make our own contribution to the development of the world economy.

The metal structure of 15CrMo steel is martensite. This material has good oxidation resistance at about 650℃, good thermal strength below 600 ℃, and good shock absorption and thermal conductivity. JIS SM490B plates, 15CrMo steel is widely used in steam turbines. However, this type of steel has a greater tendency to harden and has poor welding performance. GB/T 3077-2015 15CrMo plates are supplied with 5 to 70MM thick, can be set to roll futures.

A516 Gr65 steel is a carbon steel plate for medium and low temperature pressure vessels, which implements the ASTM A516 standard. A516 Gr65 plate has the following characteristics: good impact resistance, small temperature deformation, good welding performance, good fatigue resistance, good anti-layered cracking performance, micro-alloying, high purity, low carbon equivalent, strong resistance to sulfur and hydrogen. Our JIS SM490B plates pressure vessel plate has good dimensional tolerance and surface quality.

At present, the cutting thickness limit of laser cutting is 20 mm. However, it should be noted that oxygen will be added into the laser beam to cut 20 mm thick JIS SM490B plates steel plate, which will form a thin oxide film on the cutting surface, which may affect the cutting quality, Therefore, attention should be paid to this point to avoid problems.

A36 plates technical parameters, A36 ms steel sheets datasheet: A36 steel consists of carbon 0.25% max., phosphorus 0.040% max., sulphuric 0.050% max., silicon 0.40% max. and copper 0.20% max. Mechanical properties of A36 steel include yield strength 250Mpa min., tensile strength 400-500Mpa and elongation 20% min. Brinell hardness 119-162 HBW, based on the conversion from tensile strength. Modulus of elasticity (Young’s modulus): 200 GPa (29×103 ksi). Shear modulus: 79.3 GPa (11.5×103 ksi). The density of JIS SM490B plates, A36 plates is 7.85g/cm3.

If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.