WStE380 carbon steel material structural vs boiler steel plate

WStE380 carbon steel material,BEBON has been engaged in the piping industry as a professional manufacturer and supplier of steel plates, ship plates, corten steel, pressure vessels, steel pipelines, seamless pipe and ERW pipes since the inception We provide integrated solutions to whole-package procurement covering miscellaneous ferrous and non-ferrous piping components The products are widely used in oil & gas project, subsea or offshore platform piping, chemical & pharmaceutical pipeline, power plant, sewage treatment, water supply piping, heat exchange application,WStE380 carbon steel material.

WStE380 carbon steel material,The metal structure of 15CrMo steel is martensite. This material has good oxidation resistance at about 650℃, good thermal strength below 600 ℃, and good shock absorption and thermal conductivity. , 15CrMo steel is widely used in steam turbines However, this type of steel has a greater tendency to harden and has poor welding performance GB/T 3077-2015 15CrMo plates are supplied with 5 to 70MM thick, can be set to roll futures,WStE380 carbon steel material.

We have 4 typical production lines, which can produce hot rolled Seamless, LSAW, ERW and SSAW pipes SSAW pipe production line range is OD 2191mm-3500mm, wall thickness 32mm-254mm, Annual capacity is 200 thousandtons,WStE380 carbon steel material.

WStE380 carbon steel material,Blast furnace ironmaking is a traditional ironmaking method based on coke energy. It cooperates with converter steelmaking and is the main method of producing steel at present. This dominance of blast furnace ironmaking is not expected to change for quite a long time. The essence of blast furnace ironmaking is the reduction of iron. Besides, coke is used as fuel and reducing agent. At high temperatures, iron ore or iron-containing raw materials are reduced from an oxide or mineral state to liquid pig iron.

Grade P295GH chemical composition under EN10028-2:2003 is displayed as follows Chemical composition (C: 008 to 020; Cr: ≤030; Si: ≤040; Cu: ≤030;Mn: 090 to 150; Mo: ≤008;P: ≤0025; Nb: ≤0020;S: ≤0015; Ni: ≤030;Al: ≤0020; Ti: 003; N: ≤0012; Vi: ≤002) The yield Strength MPa (min) of P295GH steel plate with thickness less than 16mm is 295MPa, and the tensile strength is 460-580MPa,WStE380 carbon steel material.

From the order to the delivery, there are three quality inspections to ensure that the qualified rate of finished products is more than 100%. We promise that every order will be tracked in a timely manner to ensure that customers can receive goods safely and constantly listen to their opinions and suggestions, reflect on our own problems, and let customers feel at ease. We have a large warehouse in Shanghai and Tianjin, which can provide customers with sufficient sources of supply.