WStE380 carbon steel plate sheet will fluctuate within a narrow range

Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the WStE380 carbon steel plate sheet project. In response process of customer service center, in case of technical support and after-sales service demand, the user shall contact the full-time engineer of WStE380 carbon steel plate sheet customer service center, and the technical personnel will give corresponding answers and on-site treatment according to the needs of users.

Steel is the main raw material for shipbuilding and marine engineering structure construction, accounting for 20% ~ 30% of the construction cost of hull and marine engineering. The steel WStE380 carbon steel plate sheet products involved mainly include steel plates and section steel (marine bulb flat steel, H-beam, angle steel, etc.), casting and forging steel and supporting welding materials, etc. Among them, the amount of steel consumed for hull construction accounts for about 60% of the total ship mass, and sheet metal accounts for about 88%.

Laser cutting, it is a specific way of cutting WStE380 carbon steel plate sheet steel plate cutting processing, is also one of the common way of cutting its on the cutting or machining parameters, if you want to get the right number, is that you can adjust these parameters to achieve a goal, adjust a few times more to get accurate numerical right in addition, we also need to know is, the faster the cutting WStE380 carbon steel plate sheet speed, the light intensity is smaller, so, the smaller the laser penetration is, in turn, can control the penetration depth of laser.

Chemical composition of 65Mn steel: C 0.62-0.70, Si 0.17-0.37, Mn 0.90-1.20, Cr ≤ 0.25, Ni ≤ 0.30, Cu ≤ 0.25. 65Mn steel mechanical properties: tensile strength: ≥735 Mpa, yield strength: ≥430 Mpa, elongation after fracture: ≥9%, reduction of area: 30%, impact absorbed energy: no impact. WStE380 carbon steel plate sheet, 65Mn steel has high strength, high hardenability, less decarburization tendency, overheat sensitivity, easy to produce quenching cracks and temper brittleness. 65Mn steel is used for making various flat and round springs, leaf springs, spring rings, valve springs, steel wire cold coil springs, clutch springs of light trucks and cars.

Our company is located in the Central Plains, Zhengzhou City, convenient transportation. There is the largest Xinzheng airport, welcome customers from all over the world to visit our company. Our factories are all located near the port. The logistics is very convenient, which can save the delivery time.

BBN company is an industry leading steel service center that supplies a full line of hot rolled steel plate in a variety of sizes, grades and finishes. Hot rolled steel is an economical option that offers reliable performance and versatility. In the WStE380 carbon steel plate sheet hot rolled process, high temperature is used to heat the steel above its recrystallization point. In this state it becomes more malleable, allowing it to be easily formed into a variety of shapes. If you are interested in A36 hot rolled plates price, welcome to come and visit us.