5mm-100mm plate EN steel grade S460ML material

Zhengzhou BBN steel company was established in 2000. After more than ten years of development, it has formed a professional operation pattern integrating R&D, production, sales and after-sales service. In recent years, EN steel grade S460ML material based on a high starting point and high technology, the company has vigorously developed various steel products EN steel grade S460ML material and deep-processed parts, steel structures, precision castings, seamless pipes.

Marine steel is widely used in all kinds of ships and offshore platforms, but it also puts forward higher and higher requirements for marine steel. In general, the demand share of EN steel grade S460ML material high-strength marine steel continues to increase. In terms of strength requirements, with the change of ship's large-scale, safety and coating specifications, the general trend is that the consumption of ordinary strength grade A marine steel plate is gradually reduced, and the consumption of high-strength marine steel plates is increased.

Different form EN steel grade S460ML material, room temperature and medium temperature boiler steel shall have those advantages:Higher room temperature strength;Good impact toughness and low notch sensitivity;As the drum and other parts require a lot of cold deformation during processing, room temperature and medium temperature boiler steel must have good aging toughness;Good processing technology and welding performance;Good macrostructure, etc.

How to distinguish between hot rolled and cold rolled process?The hot-rolled steel sheet has low strength, easy production and processing, and good plasticity. The process performance of the hot-rolled steel plate is poor (air oxidation and low smoothness), but the plastic deformation is good. Generally, it is medium and thick plate, EN steel grade S460ML material, high compressive strength, high strength, and high surface smoothness. Cold-rolled steel sheets have high strength and relatively difficult production and processing, but they are not easy to deform and have high compressive strength.

20 # material is a high-quality low-carbon carbon steel, cold-extruded, carburized and hardened steel. EN steel grade S460ML material, 20 # material has low strength, good toughness, plasticity and good weldability. Chemical composition of 20 # round steel bar: C: 0.17 ~ 0.23, Si: 0.17 ~ 0.37, Mn: 0.35 ~ 0.65, S: ≤0.035, P: ≤0.035, Cr: ≤0.25, Ni: ≤0.30, Cu: ≤0.25. 20# carbon steel mechanical properties: Shear strength 275 ~ 392MPa, Tensile strength is 253 ~ 500MPa, elongation min. 25%.

Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.