BBN sold SM400A carbon steel plate sheet to San Marino

Strip steel is coiled and curved steel plate, which is different from common steel pipes and steel plates. Strip steel has obvious characteristics. First, it is thin and easy to curl, which is convenient for logistics and transportation. Second, the surface quality of SM400A carbon steel plate sheet, strip steel is good, the luster is bright and it has good flexibility. Third, the strip steel is easy to process. When you need to use it, you only need to straighten the bent part and you can directly process it. Fourth, the precision is high, and the strip steel can be made of plain carbon steel, carbon structure steel, spring steel, tool steel, stainless steel, etc.

The outer diameter of the hot-rolled seamless pipe is generally larger than 32mm, and the wall thickness is 2.5-75mm. The diameter of the cold-rolled seamless pipe can be 6mm, the wall thickness can be 0.25mm, the outer diameter of the thin-walled pipe can be 5mm, and the wall thickness is less than 0.25mm. The size accuracy of the cold-rolled seamless pipe is higher than that of the hot-rolled seamless pipe, SM400A carbon steel plate sheet.

45# steel is commonly used medium carbon quenched and tempered structural steel. The steel SM400A carbon steel plate sheet is generally cold plastic, annealing and normalizing are slightly better than quenching and tempering, with higher strength and better machinability. After proper heat treatment, 45# carbon steel can certain toughness, plasticity and wear resistance can be obtained. 45# steel normalizing can improve the cutting performance of roughness less than 160HBS.

In actual processing applications, the processing SM400A carbon steel plate sheet thickness of flame cutting ranges from 6 to 200 mm, and the SM400A carbon steel plate sheet cutting thickness can even reach 350 mm by replacing the air pipe and cutting torch nozzle. In order to better improve the cutting quality, the related process parameters will be slightly different when using flame cutting for materials of different thickness. The verticality of the cutting surface processed by the CNC flame cutting machine is generally high, and the slope can be controlled below 2-3°. The characteristic is that flame cutting performs better when cutting SM400A carbon steel plate sheet with a certain thickness above 10mm.