Carbon Q690E carbon steel plate sheet grade vs stainless steel

The company produces seamless steel pipes such as GB, ASTM, etc. all year round, including low and medium pressure boiler steel pipes, high pressure boiler steel pipes, Q690E carbon steel plate sheet seamless steel pipes for ships and petroleum cracking Q690E carbon steel plate sheet steel pipes, Seamless steel pipe, oil sleeve steel pipe, pipeline steel pipe, hollow sucker rod, common fluid steel pipe, structural pipe, kauden steel pipe, seawater corrosion-resistant titanium pipe and imported alloy steel pipe are used for high-pressure fertilizer equipment. The products are widely used in petroleum, chemical, electric, boiler, ship, machinery and other industries, and have been sold all over the country. Many Q690E carbon steel plate sheet products have been exported to the Middle East, India, Southeast Asia and Europe and America.

The difference between alloy steel plate and carbon steel has the following points. First, the hardenability of carbon steel is low, and the maximum diameter of water quenching of carbon steel is only 10 mm to 20 mm; second, the strength of carbon steel is only 235 MPa, while that of alloy steel is more than 360 MPa. Third, carbon steel has poor tempering stability. In order to ensure high strength, low tempering is used for carbon steel during quenching and tempering treatment, so the toughness of the carbon steel is insufficient. Fourth, the corrosion resistance, low heat resistance, and wear resistance of carbon steel cannot be compared with alloy steel, Q690E carbon steel plate sheet.

Advantages of NM360 wear-resistant steel plate: NM360 steel has high strength: generally its yield strength is above 300MPa. 2. High toughness: The elongation is required to be 15% -20%, and the room temperature impact toughness is greater than 600kJ / m ~ 800kJ / m. For large welded components, high fracture toughness is also required. 3. NM360 steel plate has good welding performance and cold forming performance. 4. Low cold and brittle transition temperature.

The correct choice of billet type, section shape, size and weight are of great significance to Q690E carbon steel plate sheet steel rolling production. Steel rolling production has certain technical requirements for raw materials, such as steel type, section shape, size, weight, and surface quality. The consideration of these technical requirements is necessary to ensure the quality of steel. It should also be specifically considered when determining and selecting the blank. The Q690E carbon steel plate sheet rolling method can be divided into cold rolling and hot rolling according to the rolling temperature.

Composition of low alloy steel plate: Low carbon: due to the high requirements for toughness, weldability and cold formability of low alloy steel plate, the carbon content is not more than 0.20%; manganese is added; the auxiliary elements such as niobium, titanium or vanadium are added; a small amount of niobium, titanium or vanadium forms fine carbide or carbonitride in the steel, which is conducive to obtaining fine ferrite grains and improving the strength and toughness of low alloy steel plate; in addition, The corrosion resistance of Q690E carbon steel plate sheet, low alloy steel plate can be improved by adding a small amount of copper (< 0.4%) and phosphorus (about 0.1%).

Responsibilities: dealing with quality feedback and complaints from Customer.Bebon has the after sale service department, which is responsible to solve the problem of technical support and quality, service complaints. You can also contact the company customers service online if you have any problem when you receive the products. The responsibility is to deal with quality feedback and complaints from Customer. Welcome to come and visit our company office.