Cheap price S275J2 carbon steel plate sheet cutting plate

10# seamless steel pipe chemical composition : C: 0.07-0.13, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.15, Ni: 0.30, Cu: 0.25. 10# seamless steel pipe mechanical properties: recommended heat treatment temperature: 930℃, tensile strength: 335 MPa, yield strength: 205 MPa, elongation: 31%, impact energy is not required. S275J2 carbon steel plate sheet, 10# seamless steel pipe has high plasticity and toughness, no temper brittleness tendency, and good weldability. Its machinability under cold drawing or normalizing treatment is obviously improved. In cold state, 10# seamless steel pipe is easy to be extruded and molded, but its strength is low, and its hardenability is very poor.

Advantages of S275J2 carbon steel plate sheet: 1. Steel purity: Wugang can produce high purity molten steel with P 0.010%, S 0.005%, N70ppm, O15ppm, H2ppm, and 20ppm total inclusions in the steel. 2. Good toughness and weldability. 3. The heat treatment technology: normalizing, quenching, tempering, tempering and other heat treatment processing can be carried out on the steel plate as required. 4. Significantly improve the plasticity and impact toughness of steel, and improve the anisotropy of steel.

Blast furnace ironmaking is a traditional ironmaking method based on coke energy. It cooperates with converter steelmaking and is the main method of producing S275J2 carbon steel plate sheet steel at present. This dominance of blast furnace ironmaking is not expected to change for quite a long time. The essence of blast furnace ironmaking is the reduction of iron. Besides, coke is used as fuel and reducing agent. At high temperatures, iron ore or iron-containing raw materials are reduced from an oxide or mineral state to liquid pig iron.

The company now has S275J2 carbon steel plate sheet oversea market department, sales and supply department, finance department, logistics department, technical equipment department, quality management department, production department and other departments. The staff with college degree or above accounted for more than 80%, and there were more than S275J2 carbon steel plate sheet 30 professional and technical personnel. The LSAW pipe production line can produce welded pipes with Φ350-1800mm, wall thickness 6-80mm, and length 2-12m.