EN steel grade S235J2 plates cutting is widely used in mechanical manufacturing

"A283C is same as A283 Gr C, A283 grade C. A283C plate technical parameters: A283C plate chemical composition - max. 0.24% carbon, max. 0.40% silicon, max. 0.90% manganese, max. 0.035% phosphorus, max. 0.040% sulphuric, and min. 0.20% Cu. A283C plate mechanical properties: min. yield strength is 205 MPa, tensile strength is 380-515MPa, min. elongation is 22% in 8"" and 25% in 2"". Tolerance of A283C plate is subject to ASTM A6. The density of EN steel grade S235J2 plates, A283C plate is 7.85g/cm3."

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.

Ordinary medium and thick steel plate EN steel grade S235J2 plates is a kind of deoxidized steel. The oxygen content of the steel liquid is relatively high, and a lot of gas will be produced during the production process to make the steel liquid boil, so it is also called boiling steel. Advantages: this kind of steel plate has smooth surface, good quality and easy processing. Because this kind of steel plate has no concentrated shrinkage cavity, the amount of deoxidizer is very small and the price is lower than other steel plates.