EN steel grade S275JR plates antioxidant

A514 grade J quenched and tempered alloy steel chemical composition (melting analysis)%C: 0.12-0.21, Si: 0.20-0.35, Mn: 0.45-0.70, P max.: 0.035, S max.: 0.035, Mo: 0.50-0.65, B: 0.001-0.005The mechanical properties in thickness (mm)T≤65Yield strength (≥Mpa): 690Tensile strength (Mpa):760-895Elongation in ≥, %: 18

EU-28 countries produced 38.29 million mt of EN steel grade S275JR plates, crude steel in the first quarter down by ten percent year on year. In the given period, Germany's output was 9.47 million mt. falling by 9.3 percent year on year. Italy's crude steel output was 5.28 million mt, down by 16.2 percent year on year, and France's crude steel output amounted to 3.73 million mt decreasing by 3.6 percent year on year.

High quality structural steel thick plate product EN steel grade S275JR plates dimension(mm): 40*2300*12000, 50*1780*7000, 16*2300*12000, 50*2500*10120, 55*1800*11900, 25*2300*12000, 50*2500*10060, 60*2500*8400, 60*2100*10000, 80*1920*6000, 130*2200*10000, 140*2200*10000, 55*1800*11550, 110*2320*8100, 40*1900*7350, 150*2200*10000, 45*2200*9000, 60*2500*8300, 40*2300*12000, 90*2440*12400, 125*1920*5000.

Hot-rolled steel sheet / cold-rolled steel sheet: Steel ingots or slabs are difficult to deform at normal temperature and difficult to process. They need to be heated to 1100 ° C to 1250 ° C for rolling. This EN steel grade S275JR plates rolling process is called hot rolling. Rolling at room temperature is generally understood as cold rolling. However, from the point of view of metallurgy, the boundary between hot rolling and cold rolling should be distinguished by the temperature of metal recrystallization, that is, rolling below the recrystallization temperature is cold rolling; Rolling above the recrystallization temperature is hot rolling.