EN steel grade S355J2 material vs boiler steel sheet

The metal structure of 15CrMo steel is martensite. This material has good oxidation resistance at about 650℃, good thermal strength below 600 ℃, and good shock absorption and thermal conductivity. EN steel grade S355J2 material, 15CrMo steel is widely used in steam turbines. However, this type of steel has a greater tendency to harden and has poor welding performance. GB/T 3077-2015 15CrMo plates are supplied with 5 to 70MM thick, can be set to roll futures.

The BBNSTEEL company has the first-class qualification for steel structure professional contracting, integrating production, design and installation, and can undertake various steel structure projects. The product has a wide surface, flat and smooth surface, and neat trimming. It has users in more than 10 provinces and cities in China and is exported to the United States, Canada, Japan, Europe, Southeast Asia and other countries and regions.

The main applications of normalizing are as follows:① For low carbon steel, EN steel grade S355J2 material. The hardness of low carbon steel after normalizing is slightly higher than that after annealing, and the toughness is also better, so normalizing can be used as the pretreatment of cutting.② For medium carbon steel, normalizing can be used as the final heat treatment instead of quenching and tempering treatment, or as the preparation treatment before surface quenching by induction heating.③ Normalizing can be used in tool steel, bearing steel, carburizing steel and so on, which can eliminate or inhibit the formation of network carbide, thus obtaining the good microstructure needed for spheroidizing annealing.④ Normalizing can refine the cast structure and improve the machinability of steel castings.

"The production method of seamless steel pipe can be roughly divided into cross rolling method (menesmann method) and extrusion method. The cross rolling method (menesmann method) is to pierce the tube blank with the cross roll first, and then extend it with the rolling mill. This method is fast in production, but requires high machinability of tube blank. It is mainly suitable for producing carbon steel and low alloy steel tube, EN steel grade S355J2 material tube.The extrusion method is to pierce the billet or ingot with a piercer, and then extrude it into a steel tube with an extruder. This method is less efficient than the cross rolling method and is suitable for the production of high-strength alloy steel tubes."

The company has passed the ISO9001: 2008 quality system certification, strictly implemented the ISO9001 quality management system. Besides, we have continuously improved the after-sales service network to make every effort to provide more convenient, accurate and faster services for all customers. We will supervise the production, control the quality in the factory, Inspect the cargo before shipment, Issue the test report to sales department. From the steel prodcution to steel delivery, we always focus the whole process.