Export great SA514 Gr E steel material to Thailand

The size, shape, weight and allowable deviation of Q390D, Q390D-Z35 steel plate should comply with the provisions of GB/ T709-2016. The maximum thickness of the steel plate is 135mm. When the SA514 Gr E steel material, Q390D steel, Q390D-Z35 plate thickness is less than 100 mm, the required performance level in the thickness direction is z25; when the thickness is ≥ 100 mm, the required performance level in the thickness direction is Z35, which shall specifically comply with the provisions of GB/T5313-2010.

20G steel is boiler steel, which is similar to No. 20 carbon steel. The difference is that 20G steel has higher and stricter inspection standards than SA514 Gr E steel material, No. 20 carbon steel for harmful impurities and internal defects. That is to say, 20G steel is specially produced for boiler pressure vessels. It is special purpose "No. 20 carbon steel". The use of 20G steel to make boilers is not because it is more resistant to burning than other steels such as SA514 Gr E steel material, but because of its strength, toughness, ductility, weldability, temperature influence, fatigue fracture, price and cost, etc. 20G steel is most suitable for use in medium and low pressure boilers.

We have a large number of SA514 Gr E steel material steel materials in stock, and provide deep processing services such as welding. In addition to simple welding parts, we can also weld H-beam, box column and other profiles. For such welded structure, our advantage is that there are high-quality and low-cost raw material steel plates, which can be cut into the SA514 Gr E steel material required size and welded into steel products with required shape and size, without being limited by the specifications of rolling production lines.

Our company has strict quality control standards. If you want to visit our factory, you are welcome at any time! We produce a lot of steel products every month to export SA514 Gr E steel material to all over the world. Because our customers are from all countries, they will order a large number of steel products from our company every month.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.