Export great SM490C carbon steel plate sheet to Kenya

According to the data released by the Japan iron and Steel Union (JISF), the export volume of Japanese steel in the second quarter of 2020 SM490C carbon steel plate sheet is about 4.959 million tons, a year-on-year decrease of 14.2%; the export volume in the first half of 2020 is about 11.07 million tons, with a year-on-year growth of 1.8%. It has been revealed that the year-on-year increase in export volume does not mean that Japan's export SM490C carbon steel plate sheet situation of Pugang is better in the first half of the year, but only because the base number of the same period last year is too low.

Our quality control department will do inspection for details of the steel materials SM490C carbon steel plate sheet before delivery. We would invite the customer side to attend the inspection together. If they can not come, we will also take rich pictures for them to check. Meanwhile, we will publish inspection report and send them the PDF version. Besides, we accept any third party inspection such as SGS, BV, etc. And our quality control department will support the third party to inspect the steel materials smoothly and try our best to deliver the qualified steel materials to customers earlier.

Carbon steel SM490C carbon steel plate sheet is an iron carbon alloy with carbon content less than 2.11% and a small amount of silicon, manganese, sulfur, phosphorus and other impurities. Carbon steel inevitably contains some impurity elements during smelting, which has a great influence on the performance and quality of steel, so it should be controlled. The quality of carbon steel is mainly measured by the content of sulfur and phosphorus. The lower the SM490C carbon steel plate sheet content of sulfur and phosphorus, the better the quality of carbon steel.

The toughness of steel such as SM490C carbon steel plate sheet is the ability of steel to absorb energy in the process of plastic deformation and fracture, and also the ability of steel to resist impact load. It is related to and different from the plasticity of steel. It is the comprehensive performance of strength and plasticity. The strength plasticity index of steel is obtained by static tensile test. When these indexes are used to bear the dynamic load structure, there are obvious limitations.

We supply 3500 tons SA387GR5CL1 steel plates to Pakistan. The main businesses of the Pakistan customer are manufacturing columns & towers, heat exchanger, waste heat recovery boiler, pressure vessel & reactors, tanks, etc. We arranged SGS test for the SA387GR5CL1 steel plates. The test contents include chemical composition analysis, tensile test, impact test, etc. The test results are satisfied. The Pakistan customer gave good feedback after receiving the SA387GR5CL1 steel plates.

Expect in the SM490C carbon steel plate sheet goods regardless quality be still on the price after-sales service we all will keep in the middle of go together of advantage position real attain the ream customer satisfaction.Our advantage is: experienced craftsmen SM490C carbon steel plate sheet product development technology, excellent production team, hand strict quality control, sales and after-sales service.