Export SA572 Gr 60 carbon steel plate sheet mild steel to Romania with 8000 tons

Difference between Q235 steel and Q345 steel: First, The lower limit of yield strength of Q235 steel is 235MPa, and that of Q345 steel is 345MPa. Second, Q235 steel is common carbon steel, Q345 steel is low alloy steel. They have different alloy contents. Besides, Q235 steel is for general strength application, Q345 steel is for higher strength application. SA572 Gr 60 carbon steel plate sheet, Q345 steel price is higher than Q235 steel price. But Q345 steel can save materials for sake of high strength.

We can process the steel materials according to your drawing. Or if you can not make drawing, please send us SA572 Gr 60 carbon steel plate sheet specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.

Z-direction steel refers to thick steel with good tensile resistance in thickness direction. In the application of steel plate, the reason for additional performance requirements on the thickness direction of steel is due to the existence of defects in the thickness direction of steel in the process of casting and rolling. This defect makes the steel prone to lamellar tearing during welding, which reduces or even loses the design bearing capacity of application. The Z-direction performance is required for SA572 Gr 60 carbon steel plate sheet and so on steel plate with the tensile force along the plate thickness direction greater than or equal to 40mm.

SA572 Gr 60 carbon steel plate sheet product plate specification range: Thickness 3-150mm Width 1500-4020mm Length 4000mm-17000mm Heat treatment: annealing, or normalizing and tempering