Export steel ASME SA572 carbon steel plate sheet to Malaysia more than 5000 tons

The sulfur element (S element) comes from the ore and fuel coke of steelmaking. It is a harmful element in ASME SA572 carbon steel plate sheet etc. steel. Sulfur exists in steel in the form of iron sulfide (FeS). FeS and Fe form a low melting point (985℃) compound. The hot working temperature of steel is generally above 1150 - 1200℃, so when the steel is hot working, the premature melting of FeS compound causes the workpiece to crack, which is called "hot brittleness". It reduces ductility and toughness of steel and causes cracks during forging and rolling. Sulfur is also detrimental to welding performance and reduces corrosion resistance.

ASME SA572 carbon steel plate sheet, St52-3 steel is a low alloy, high strength structural steel which can be readily welded to other weldable steel. St52-3 steel's mechanical properties is yield strength more than 355 MPa, tensile strength 490-630Mpa. For St52-3 steel, the C element content is 0.24%, the Si element content is 0.55% max, the Mn element content is 1.60% max, the P element content is 0.045% max, the S element content is 0.045% max.

"Efficiency is benefit, time is money", the company is equipped with a high standard logistics team. After the products pass the factory inspection, they will coordinate the shipment as soon as possible according to customer requirements and schedules to hand over the booked steel materials to customers at the first time, to ensure no delay of customer's project progress, to strive for more project preparation time for customers.

The advantages of ASME SA572 carbon steel plate sheet, medium and thick boiling steel plate: The surface is relatively smooth, the quality is good, and it is easy to process. Because medium and thick boiling steel plate does not have concentrated shrinkage holes, the amount of deoxidizer is small, and boiling steel plate price is lower than other steel plates. Disadvantages of medium and thick boiling steel plate: it has a lot of gas content and impurities, it is not easy to weld, and its bearing capacity is worse than other steel plates, so it is not suitable for parts that need to bear gravity.