Flaw detection disqualification of SA514 grade Q steel material

The company adheres to the "variety, quality and efficiency" road. We have established a technology center, a brand cultivation management system and a quality control system. Now the company has formed an independent innovation system integrating SA514 grade Q steel material production, learning, research and marketing. Our company has passed ISO9001 quality management system certification and ISO10012 measurement management system certification.

ASTM A441, used in low-tolerance, state-of-the-art structures, such as towers and large telescopes, SA514 grade Q steel material is a high-strength structural grade with a yield strength of 40,000 to 50,000 psi and an allowable bending stress of 24,000 to 30,000 psi.

NM400 alloy steel plate is a kind of wear-resistant steel plate. NM—The first letter of the Chinese pinyin 400 of the characters “resistant” and “grind” for wear resistance is the HB value of the Brinell hardness value. NM400 alloy plate is widely used in engineering machinery, mining machinery, coal mining machinery, environmental protection machinery, metallurgical machinery and other product parts. Excavator, loader, bulldozer bucket plate, blade, side blade, blade.

We can cut the large steel plates SA514 grade Q steel material by your requirements, but to the width and length your demand; we can make the surface of the cut steel plate to be bright by milling and grinding, also can make holes and make angle degrees, and can weld by your drawing. For the SA514 grade Q steel material product thickness under 30mm, we mainly cut by laser cutting; for thickness over 30mm, mainly OXY-cut, flame cutting. The processing plates conclude cutting the larger plate into the small sizes customer demand, cut by drawing, cut to special sizes, weld the cut parts by drawing.

Chemical composition of Q390C steel plate: C ≤ 0.20, Si ≤ 0.50, Mn ≤ 1.7, P ≤ 0.030, S ≤ 0.030, Nb ≤ 0.07, V ≤ 0.20, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.50, Cu ≤ 0.30, N ≤ 0.015, Mo ≤ 0.10, Al ≤ 0.015. The mechanical properties of Q390C steel plate are: yield strength ≥ 390 MPa, tensile strength 470-620 MPa, elongation after fracture ≥ 18%, impact energy 34J. SA514 grade Q steel material, Q390C steel plate is used for bridges, vehicles, ships, workshops and other large structural parts, high and medium pressure Petrochemical vessels, boiler tubes, pipes, superheaters, pressure vessels, heavy machinery, etc. application.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.