High quality USt37-2 carbon steel plate sheet manufacturer in China

Normalizing is a heat treatment that improves the toughness of steel. After the steel components are heated to 30-50°C above the Ac3 temperature, they are kept for a period of time and then air cooled. The main feature is that the cooling rate is faster than annealing but lower than quenching. During normalizing, the crystal grains of the steel USt37-2 carbon steel plate sheet can be refined in a slightly faster cooling. Not only can satisfactory strength be obtained, but also the toughness (AKV value) can be significantly improved and reduced The tendency of the component to crack.

The large diameter cold drawn seamless steel pipe is a steel pipe with an outer diameter of more than 1000mm. The large diameter seamless steel pipe is made of steel ingot or solid billet through perforation and then hot rolling, cold rolling or cold drawing. If they are long, they need to remove the redundant parts, that is, cut them out. Their length USt37-2 carbon steel plate sheet is suitable for the length required by the construction of steel pipes.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.

S355J2 is a low-alloy high-strength steel, which can be treated to meet the requirements of Z-15, Z-25, Z-35 and level I, level II and level III flaw detection.The extension grades of S355J2 are S355J2, S355J2-Z35 and S355J2 + N-Z35, USt37-2 carbon steel plate sheet. On the basis of S355J2, S355J2-Z35 increases the requirement of S355J2 steel plate thickness direction performance, namely Z-direction performance. S355J2 + N-Z35 is a heat treatment process which increases Z-direction properties and normalizing rolling (or normalizing).