High strength EN steel grade S355JR plates properties

The company specializes in producing high-strength low-temperature resistant low alloy plates Q345C, Q345D, Q345E, SM400, , SM490, S355J2 + N;bridge plates Q345qC / qD / qE, Q370qE high-strength structural plates, etc. Z-direction performance (Z15, Z25, Z35). Above materials have high yield strength, high tensile strength, Brinell hardness, and Rockwell hardness; and low temperature resistance, they also can be maintained at high temperatures of -60 ℃.

EN steel grade S355JR plates,We have 4 typical production lines EN steel grade S355JR plates, which can produce hot rolled Seamless, LSAW, ERW and SSAW pipes. The Seamless pipe production line range is OD 10.3mm-965.2mm, wall thickness 1.0mm-60mm, Annual capacity is 500 thousand tons. LSAW pipe production line range is OD 406mm-1524mm, wall thickness 6mm-50mm, Annual capacity is 150 thousand tons.

EN steel grade S355JR plates,The preparation of galvanized steel before welding is the same as that of ordinary low-carbon steel. It is necessary to carefully handle the groove size and nearby galvanized layer. In order to achieve penetration, the groove size shall be appropriate, generally 60 ~ 65 °, with a certain gap, generally 1.5 ~ 2.5mm; in order to reduce the penetration of zinc into the weld, the galvanized layer in the groove can be removed before welding. In the practical work, the centralized beveling, no blunt edge technology for centralized control, two-layer welding process, reducing the possibility of incomplete penetration.

Our company has strict quality control standards. If you want to visit our factory, you are welcome at any time! We produce a lot of steel products every month to export to all over the world. Because our customers are from all countries, they will order a large number of steel products from our company every month.EN steel grade S355JR plates

If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.EN steel grade S355JR plates