Hot rolled JIS SM520B plates mechanical properties

JIS SM520B plates,The metal structure of 15CrMo steel is martensite. This material has good oxidation resistance at about 650℃, good thermal strength below 600 ℃, and good shock absorption and thermal conductivity. , 15CrMo steel is widely used in steam turbines. However, this type of steel has a greater tendency to harden and has poor welding performance. GB/T 3077-2015 15CrMo plates are supplied with 5 to 70MM thick, can be set to roll futures.JIS SM520B plates,The company is based on the principle of good faith, small profits and quick sales, and keeps forging ahead. In the fierce market competition, with good cooperation and sincere service spirit, we win the trust of our customers and develop rapidly. We will create a win-win situation with our customers and create a better future with the belief of pioneering, pursuing excellence and learning.S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.JIS SM520B plates,After a certain period of time, the steel products will reduce the toughness and increase the hardness, which is called aging effect. Generally, this effect is strongest at 200-300 ℃. The aging tendency of low carbon steel (about 0.1% carbon content) is especially large, while high carbon steel and alloy steel containing molybdenum, barium or tungsten are not easy to produce aging. For boiler steel plate, it is required that the reduction rate of impact initial property is not more than 50%, or the absolute value of impact initial property is not less than 3-3.5KGM / cm2.JIS SM520B platesOver the years, the company has strived for perfection, being well-received. By virtue of stable product performance, high-quality engineering effects and perfect service system, we have won the trust of many customers, and our engineering cases and after-sales service systems are spread all over the world. We regularly conduct quality tracking and return visits by phone and email, listen to customers' opinions, and continuously improve service quality.JIS SM520B plates