Is JIS carbon steel SM490A CS plate mild steel?

Focusing on the energy conservation and emission reduction objectives proposed by the municipal government, the company gives full play to the advantages of JIS carbon steel SM490A CS plate circular economy formed after the comprehensive completion and operation, and vigorously promotes the implementation of energy conservation objectives. Through measures such as energy saving, technological innovation and JIS carbon steel SM490A CS plate management strengthening, the energy saving target of annual reduction of added value energy consumption by 7%. It has made great contribution to energy saving of over completion.

Composition characteristics of JIS carbon steel SM490A CS plate product: (1) Low carbon: Due to high requirements for toughness, weldability and cold formability, its carbon content does not exceed 0.20%. 2) Add manganese-based alloying elements. 3) Adding auxiliary elements such as niobium, titanium or vanadium: a small amount of niobium, titanium or vanadium forms fine carbides or carbonitrides in the steel, which is beneficial to obtain fine ferrite grains and improve the strength and toughness of the steel.

Wear resistant steel plate has high wear resistance and good impact performance. It can be cut, bent, welded, etc. Wear resistant steel plate can be connected with other structures by welding, plug welding, bolt connection, etc.. It is time-saving and convenient in the process of maintenance site. Wear resistant steel plate JIS carbon steel SM490A CS plate is widely used in metallurgy, coal, cement, power, glass, mining, building materials, brick and tile industries. Compared with other materials, it has a high cost performance and has been favored by more and more industries and manufacturers.

Compared with the common pressure vessel, the pressure parts of the boiler not only bear the pressure, but also suffer from the radiation and erosion of the high temperature flue gas. Once the pressure components of the boiler fail in operation, it will cause extremely serious consequences. Therefore, the JIS carbon steel SM490A CS plate, steel materials used to manufacture the pressure components of the boiler must have enough high strength, plasticity, toughness, fatigue resistance and corrosion resistance, as well as good high-temperature mechanical properties for high-temperature components.

JIS carbon steel SM490A CS plate, Chinese material Q235B is one of the most widely used carbon steel in the world. Some like to compare its strength with other equivalent steel grades. We need to take care that the Q235B steel strength varies with thickness. For the min. yield strength of Q235B steel plate: it is 235Mpa if thickness ≤16mm, 225 Mpa for thickness 16-40mm, 215 Mpa for thickness 40-60mm, 205 Mpa for thickness 60-100mm, 195 Mpa for thickness 100-150mm, 185 Mpa for thickness over 150mm. The tensile strength of Q235B steel plate is 375-500 Mpa.

our company is a professional ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates steel exporter and a steel Stockist in china. We keep more than JIS carbon steel SM490A CS plate 1000 tons ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates steel in stock every month.

Our company has established and constantly improved the customer service system and emergency response system. Through the customer service management system, we track the service of the after-sales service team and provide efficient and standard services in time. At the same time, the company formulates a regular return visit system, compares the historical cases of customer problems, proposes a pre solution, and ensures that the service is in place in a short time.