JIS carbon steel SM490YA CS plate Vs A 36 Steel

Pressure vessel steel plate is mainly used for manufacturing pressure vessel or other similar equipment for gas separation and gas storage and transportation in petroleum and chemical industry. Generally, the working pressure of pressure vessel steel plate is 320kg / cm2 or 630kg / cm2 under normal pressure, and the temperature is within the range of - 20-450 ° C. It is required that the pressure vessel steel plate has not only certain strength and good plasticity and toughness, but also good cold bending and welding performance.JIS carbon steel SM490YA CS plateThe company adheres to the people-oriented concept and takes "learning, sharing, gratitude, integrity, respect and responsibility" as the enterprise values. Advanced equipment, scientific standardized management, strict quality assurance system and high-quality team are the core competitiveness of the company. The company will continue to provide customers with high-quality, timely and perfect steel products and services under the guidance of the mission of "striving for perfection to meet customer needs".During the construction of hot-dip galvanized pipe, the correct welding process shall be adopted, the inspection and acceptance shall be carried out in strict accordance with the specification, and the anti-corrosion treatment (zinc rich paint) shall be done timely after the welding is completed. It is feasible in the construction process of open and closed air conditioning system, which can improve the construction speed and the firmness of the pipe connection. Therefore, the hot-dip galvanized pipe can be welded and connected under the construction conditions and on the premise of relevant protection and anti-corrosion measures.JIS carbon steel SM490YA CS plateAfter the steel plate is produced from the original factory, it will pass through a series of transportation and storage links and then be delivered to the processing workshop. During this period of time, the steel plate surface will contact with the air continuously, which will inevitably produce a layer of oxide skin. The oxide skin is a difficulty in the treatment process. It has high melting point, is not easy to burn and dissolve, increases preheating time, reduces cutting speed. Therefore, the surface of the steel plate should be derusted before cutting.JIS carbon steel SM490YA CS plateJIS carbon steel SM490YA CS plate,In addition to quality assurance, service is also important for the competition of steel suppliers. All the after-sales service personnel of the company have received professional training and assessment. The steel products supplied by our company enjoy the life-long quality problem replacement service. In the process of using our steel products, if there is any problem, just contact us in time, and our after-sales service personnel will look for countermeasures and solve the problem with you as soon as possible.JIS carbon steel SM490YA CS plate