JIS carbon steel SM490YB CS plate Vs Stainless steel plate

JIS carbon steel SM490YB CS plate,We are world class steel materials supplier. We are engaed in providing raw steel materials such as steel plates / steel coils / steel sheets / steel pipes, deep processing and a series project design and solutions to clients. We guarantee to return goods for free for quality problem during its lifetime. Your satisfactory is our permanent pursue. We always welcome advise from clients to make self-improvement continously. And sincerely to build long-term cooperation with you.JIS carbon steel SM490YB CS plate

,JIS carbon steel SM490YB CS plate., 40Cr material is a common machinery manufacturing steel under GB/T 3077-2015 standard. After tempering, it has good comprehensive mechanical properties, good low temperature impact toughness and low notch sensitivity. The hardenability of steel is good. It can be hardened to Ф28-60mm during water quenching and Ф15-40mm during oil quenching. The cutting performance is better, when the hardness is HB174 -229, the relative cutting workability is 60%.

15CrMo alloy steel plate is pearlite structure heat-resistant steel, which has high heat strength (δb≥440MPa) and oxidation resistance at high temperature, and has certain resistance to hydrogen corrosion. Due to the high content of Cr, C and other alloying elements in steel, the hardening tendency of steel JIS carbon steel SM490YB CS plate is obvious and the weldability is poor 15crmo alloy steel plate is mainly used in petroleum, petrochemical, high-pressure boilers, etc,JIS carbon steel SM490YB CS plate.

The main applications of normalizing are as follows:① For low carbon steel, The hardness of low carbon steel after normalizing is slightly higher than that after annealing, and the toughness is also better, so normalizing can be used as the pretreatment of cutting② For medium carbon steel, normalizing can be used as the final heat treatment instead of quenching and tempering treatment, or as the preparation treatment before surface quenching by induction heating③ Normalizing can be used in tool steel, bearing steel, carburizing steel and so on, which can eliminate or inhibit the formation of network carbide, thus obtaining the good microstructure needed for spheroidizing annealing④ Normalizing can refine the cast structure and improve the machinability of steel castings,JIS carbon steel SM490YB CS plate.

SA516Gr70 steel chemical composition (%):C≤030, Mn: 079-130, P≤0035, S: ≤0035, Si: 013-045 ASME SA516Gr70 material is a carbon steel grade for medium and low temperature pressure vessels In order to meet the different requirements of users and facilitate production management, the S and P requirements of steel grades are divided into three levels of Ⅰ, Ⅱ and Ⅲ SA516Gr70 pressure vessel steel is used to improve the notch toughness of welding steel plates for pressure vessels,JIS carbon steel SM490YB CS plate.

The company adopts one-to-one fast service and has formed a professional after-sales service team to deal with various problems reflected by customers as soon as possible. At the same time, a traceable product traceability system has been established. It has always been placed at an important core position to resolve customer worries. Our steel products are always committed to “quality issues, life-long replacement”, which is the embodiment of our comprehensive service.