Price of Mild Steel Plate EN steel grade S460N material Per Ton

Flat steel is a kind of steel with rectangular cross-section and blunt edges at the edges and corners. It is usually 12-300 mm wide and 3-60 mm thick. Compared with EN steel grade S460N material ordinary steel plate, the utilization rate of flat steel is increased by one to five percentage points. Moreover, flat steel can be produced with fixed thickness, width and length according to the user's requirements, which saves the cutting process for users, reduces the consumption of labor and materials, and also reduces the processing loss of raw materials, saving time, labor and material.

According to the data released by the Japan iron and Steel Union (JISF), the export volume of Japanese steel in the second quarter of 2020 EN steel grade S460N material is about 4.959 million tons, a year-on-year decrease of 14.2%; the export volume in the first half of 2020 is about 11.07 million tons, with a year-on-year growth of 1.8%. It has been revealed that the year-on-year increase in export volume does not mean that Japan's export EN steel grade S460N material situation of Pugang is better in the first half of the year, but only because the base number of the same period last year is too low.

The company has our own truck fleet, and can transfer products flexibly and quickly. At the same time, we have large warehouses near the ports of Tianjin and Shanghai, so as to ensure that we can deliver high-quality products to customers in the first time. At the same time, it also greatly reduces the transportation cost, and realizes the double harvest of time benefit and economic benefit. Time guarantee is one of the important strengths of our service.

EN steel grade S460N material, Q345 and Q345B are steel numbers. The differences are as follows:1. Q345 is general and does not indicate the quality level; Q345B is clear and the quality level is B.2. Q345 does not require to inspect the impact performance; Q345B requires that the impact performance at room temperature is qualified (impact at 20 ℃).3. Q345 does not indicate carbon content of steel; Q345B carbon content is 0.20%.Q345 refers to carbon structural steel with yield point (σ s) of 345MPa. The following letters indicate the quality level, including A, B, C, D and E.