Q345B carbon steel material standard for carbon steel plate

Q345B carbon steel material,S355J0 steel is a low alloy structural steel. We can supply S355J0 structural steel plates up to 400mm, with a minimum yield strength 355MPa when plate thickness less than 16mm, min. yield strength 345MPa when plate thickness range 16mm to 40mm. Without any special rolling or heat treatment for S355J0 steel plate and sheet, Q345B carbon steel material, the abbreviated designation of this delivery condition shall be AR (As rolled),Q345B carbon steel material.Over the years, the company has trained a number of professional sales talents, enriched the concept of various marketing and customer service, and strengthened the business strength of the company. Now the company's business department, marketing department and information department constitute the market development network; the finance department, personnel department, logistics department, shipping department, document department and after-sales service department constitute the service customer network.Q345B carbon steel material,The visual inspection (VI) or visual detection method is to scan the surface of the steel plate through a machine vision system (CCD line camera), convert the captured target into an image signal, and send it to a dedicated image processing system, which converts it into a digital signal based on pixel distribution and brightness, color and other information. The system performs various operations on these signals to extract the characteristics of the target, and then controls the operation of the equipment on the spot according to the result of the discrimination. Visual detection method can achieve online high-speed detection for the steel plate."The production method of seamless steel pipe can be roughly divided into cross rolling method (menesmann method) and extrusion method. The cross rolling method (menesmann method) is to pierce the tube blank with the cross roll first, and then extend it with the rolling mill. This method is fast in production, but requires high machinability of tube blank. It is mainly suitable for producing carbon steel and low alloy steel tube.The extrusion method is to pierce the billet or ingot with a piercer, and then extrude it into a steel tube with an extruder. This method is less efficient than the cross rolling method and is suitable for the production of high-strength alloy steel tubes."The after-sale service of iron and steel products includes after-sale tracking service, technical guidance, transfer of relevant bills, handling of objections and many other contents. The handling of quality objections accounts for a large proportion. When dealing with these problems, we should distinguish the responsibilities, and compensate or return the inconvenience or loss caused to users due to steel.Q345B carbon steel material