Q345D carbon steel material density lb/ft3

Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the Q345D carbon steel material project. In response process of customer service center, in case of technical support and after-sales service demand, the user shall contact the full-time engineer of Q345D carbon steel material customer service center, and the technical personnel will give corresponding answers and on-site treatment according to the needs of users.

These grades A709 Grade 36, Q345D carbon steel material, A709 Grade 50 and A709 Grade 50W are often specified with Charpy tests referencing the specific zone or lowest anticipated service temperature. The Charpy tests are specified as non-fracture critical, which is a per-heat test (frequency "H"), or fracture critical, which is a per-plate test (Frequency "P"). Bridge steels can be ordered with plate thickness up to 150mm.

asme Q345D carbon steel material alloy steel element composition%C: 0.15-0.20, Si: 0.20-0.35, Mn: 0.85-1.15, P max.: 0.035, S max.: 0.035, B max.: 0.005, Cr: 0.40-0.65, Ni: 0.90-1.10, Mo: 0.15-0.25, V: 0.03-0.08The mechanical properties in thickness (mm)T≤65Yield strength (≥Mpa): 690Tensile strength (Mpa):760-895Elongation in ≥,%: 18

Bridge steel plates are thick steel plates made of carbon steel and low-alloy steel for bridge construction. The main applications of bridge steel plates are to build railway bridges, highway bridges, and sea-crossing bridges. The bridge steel plates are required to have high strength, durability and bear the load and impact of rolling stock. Bridge steel plates have good water resistance, low thermal conductivity, flat and lubricated surface. The main grades of bridge steel plates are A709 grade 50, A588 grade B, Q345D carbon steel material and so on.

After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.

The company has accumulated rich experience in long-term cooperation with new and old customers, which makes our products Q345D carbon steel material more unique in the same industry, and is favored and praised by users. We always adhere to the enterprise spirit of "integrity, dedication, and people-oriented" and the business philosophy of "creating benefits for users". As a leading international steel supplier, BEBON have two warehouses which are near by Tianjin port and Shanghai port.