S355K2 carbon steel material tensile strength

S355K2 carbon steel material,, A588GrB material is a high-strength low-alloy structural steel in shapes of profiles, plates and bars Through the alloying of Cu, P, Cr, Ni, a protective layer is formed on the surface of the metal substrate, so that A588GrB steel has a high resistance to atmospheric corrosion A588GrB high-strength low-alloy steel is widely used in various weather-resistant building structural parts (especially for industrial atmospheric environments), bridge auxiliary structural parts,S355K2 carbon steel material.S355K2 carbon steel material,The company adheres to the "variety, quality and efficiency" road. We have established a technology center, a brand cultivation management system and a quality control system. Now the company has formed an independent innovation system integrating production, learning, research and marketing. Our company has passed ISO9001 quality management system certification and ISO10012 measurement management system certification.S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.S355K2 carbon steel materialThe effect of 345B alloy steel plate on the mechanical properties in the annealed state. The strengthening effect of alloying elements on steel in the quenched and tempered state, because it fully utilizes all four strengthening mechanisms. Martensite is formed during quenching, and carbide is precipitated during tempering, resulting in a strong second-phase strengthening, and at the same time greatly improving the toughness. Therefore, obtaining martensite and tempering it is an economical and effective comprehensive strengthening method for steel.We should help solve the customer's problems in time, not just verbally, without solving the problems or shirking the responsibility. Improving after-sales efficiency can make customers feel respect. We should take their problems seriously and show sincerity. It can also give customers a good impression and reduce the negative impact.S355K2 carbon steel material