S460NL carbon steel material material grade comparison

At present, BBN steel has successfully developed Grade D40, E40 and other high-strength and high-toughness structural steel plates for offshore engineering, E550 and other quenched and tempered ultra-high-strength offshore platform steels, S460NL carbon steel material, API 2W Gr50 and other TPCP platform steels, and DH36-Z35 offshore oil platform steel, SM490, SM400 series of H-shaped steel for offshore oil platforms, etc., basically formed the serialization of high-strength steel for offshore platforms.

In order to prevent the deformation of S460NL carbon steel material, wear-resistant composite plate during preheating, the steel plate with good quality should be selected first. The steel plate with serious carbide segregation should be reasonably cast and heat treated by quenching and tempering. For the large and non cast wear-resistant composite plate, the solution double refining heat treatment can be carried out. At the same time, the heating temperature should be reasonably selected and the heating speed should be controlled.

At present, the cutting thickness limit of laser cutting is 20 mm. However, it should be noted that oxygen will be added into the laser beam to cut 20 mm thick S460NL carbon steel material steel plate, which will form a thin oxide film on the cutting surface, which may affect the cutting quality, Therefore, attention should be paid to this point to avoid problems.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.