SA572 grade 65 carbon steel material main useage

SA572 grade 65 carbon steel material, Q195 and Q235 belong to carbon structural steel, which are mainly used in buildings and engineering structures such as workshops, bridges, ships, etc. Of course, there are many differences between Q195 steel and Q235 steel. 1. Different components. The chemical composition of Q195 steel: C ≤ 0.12, Si ≤ 0.30, Mn ≤ 0.50, P ≤ 0.035, S ≤ 0.040. The chemical composition of Q235 steel: C ≤ 0.22, Si ≤ 0.35, Mn ≤ 1.40, P ≤ 0.045, S ≤ 0.050. 2. The prices of SA572 grade 65 carbon steel material, Q235 steel is higher than that of Q195 steel. 3. The mechanical properties of Q195 and Q235 steel are different. The tensile strength of Q195 steel is ≥390 MPa, yield strength is ≥195 MPa, and the elongation is ≥ 30%. The tensile strength of Q235 steel is 490 MPa, yield strength is ≥235 MPa, and the elongation is 23%.

Experiments have proved that the outstanding feature of the precipitation-strengthened SA572 grade 65 carbon steel material, wear-resistant plate in terms of mechanical properties is that the yield strength is greatly improved. For example, the yield strength of the wear-resistant plate after precipitation strengthening treatment reaches 480-8l0MPa, and the yield strength ratio is 0.55-0.56; the wear-resistant plate that uses molybdenum, vanadium, and iron composite alloying, the yield ratio after dispersion strengthening is 0.60- 0.65.

Hot rolled SA572 grade 65 carbon steel material steel coil and plates are among our main products. Hot rolling can significantly reduce energy consumption and cost. During hot rolling, the metal has high plasticity and low deformation resistance, which greatly reduces the energy consumption of metal deformation. Hot rolling can improve the SA572 grade 65 carbon steel material processing properties of metals and alloys, that is, the coarse grains in the casting state are broken, cracks are obviously healed, casting defects are reduced or eliminated, the as cast structure is transformed into deformed structure, and the processing properties of alloys are improved.

The company is deeply supported and loved by customers with its unique business philosophy and business model. The company has always been adhering to the "credibility first, integrity-based, quality first" purpose, and sincerely serve new and old customers. Over the past twenty years, the company has won the trust of customers by relying on good service and good reputation. Our aftersales team’s main responsibility is to deal with quality feedback and complaints from Customer.