Stock S460ML carbon steel material specification

Q550B steel is a low-alloy high-strength structural steel grade. Steel Q550A is not required for impact toughness test; Q550B is for impact toughness test at room temperature (20℃); Q550C is for 0℃ impact toughness test; Q550D is for impact toughness test at -20℃; Q550E grade is for impact toughness test Make impact toughness test at -40℃. The impact toughness test uses Charpy V-notch specimens. The impact toughness index is Akv.

When the S460ML carbon steel material, wear-resistant steel plate is produced, relevant heat treatment must be carried out, and then forging and processing are carried out after preheating. When the wear-resistant steel plate is heat treated, the temperature should be properly controlled. The heating temperature of the wear-resistant steel plate is 810-830 degrees, and the holding time depends on the furnace loading method. Tempering temperature: 320 degrees, sufficient time is necessary, oil cooling after tempering to reduce temper brittleness.

In the production process of the ironmaking process, the moisture content and air temperature of the ironmaking blast furnace blast have a direct impact on the fuel consumption and fuel consumption structure of the ironmaking process. Blast furnace blast dehumidification is to remove the moisture in the blast furnace blast, eliminate the adverse effects of atmospheric humidity fluctuations on the blast furnace forward movement, and create stable operating conditions for the fans.

After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.