The rockwell hardness of Q345D carbon steel plate sheet

The technical conditions are applicable to the high-strength A514Gr. Q alloy steel plate with thickness of 80-152mm. Q345D carbon steel plate sheet, A514Gr. Q high yield Strength Quenched and tempered alloy steel plate suitable for the rack of construction machinery and jack up offshore drilling platform. Available steel plate specifications range: thickness 8-650mm, width 1500-4020mm, length 4000mm-17000mm. Our company can supply alloy steel plates every month 500tons.

Non-secondary Q345D carbon steel plate sheet product hot selling: 26*1500*9950, 23.5*2040*8100, 24*1500*6700, 23.5*1640*6550, 29*2140*7700, 30*1500*6000, 24*2000*9550, 26.5*2000*7000, 26*1600*6000, 32*1570*6000, 32.5*1560*6250, 25.5*1300*6000, 27*2550*6800, 27.5*2700*5500, 33*2340*6700, 34*1300*4000, 25.5*1740*8700, 29*2550*9000, 29*2870*12000, 26*1300*8100, 32.5*3050*6500.

Many people will mix strip steel and steel plate together, which can usually be distinguished from the following points. First of all, the thickness of the steel plate is much thicker, and the thinner the strip steel is required, the better. Secondly, in appearance, the steel strip can be crimped and the steel plate is too thick to bend, even if it is bent, it is difficult to recover, because it is easy to break if it is bent too much. Thirdly, the strength of Q345D carbon steel plate sheet, steel plate is higher than that of strip steel. The steel plate is suitable for construction engineering, while strip steel is only suitable for processing into hardware products.

In March, the daily output of key iron and steel enterprises fell on a month on month basis, while the overall inventory of Q345D carbon steel plate sheet and so on steel materials was lower but still at a high level. In terms of production, in March, according to the key statistics, the cumulative average daily output of pig iron, crude steel and steel for iron and steel enterprises was 1.824 million tons, 1.695 million tons and 1.766 million tons respectively, down 2.1%, 3.1% and 1.7% on a month on month basis.