The Ultrasonic flaw detection principle of SM490A carbon steel plate sheet

Based on the main SM490A carbon steel plate sheet business of iron and steel, we are committed to producing high-quality, green and efficient steel products. The main steel products are medium and heavy plate, hot rolled coil, section steel, steel tube, etc., which are widely used in automobile, oil, railway, bridge, construction, electricity, transportation, machinery, shipbuilding and other important fields. Our steel SM490A carbon steel plate sheet products are exported to Indonesia, Bangladesh, Myanmar, Iran, Brazil, Mexico, UAE, Iraq, etc Egypt, Mozambique, Ukraine and other dozens of countries and regions.

SM490A carbon steel plate sheet, Q460 material is a low-alloy high-strength steel. Q stands for the strength of steel. 460 means that plastic deformation occurs only when the strength of the steel reaches 460MPa. That is, when the external force is released, the steel can only maintain the shape of the force and cannot return to its original shape. This strength is greater than that of ordinary steel. Tensile strength is 550-720MPa, elongation: 17%, Q460 material is made by adding Cr, N, V, Ti and other alloying elements on the basis of 16Mn steel.

The SM490A carbon steel plate sheet processing performance is good. Due to the uniform control of steel plate performance, excellent performance coordination and good toughness guarantee, the steel plate bending processing, drilling, cutting and other mechanical processing properties are excellent. In addition, the surface of the SM490A carbon steel plate sheet steel plate is smooth and beautiful by inhibiting and removing oxide scale from slab heating to rolling process and heat treatment in furnace without oxidation atmosphere.

The preparation of SM490A carbon steel plate sheet galvanized steel before welding is the same as that of ordinary low-carbon steel. It is necessary to carefully handle the groove size and nearby galvanized layer. In order to achieve penetration, the groove size shall be appropriate, generally 60 ~ 65 °, with a certain gap, generally 1.5 ~ 2.5mm; in order to reduce the penetration of zinc into the weld, the galvanized layer in the groove can be removed before welding. In the practical work, the centralized beveling, no blunt edge technology for SM490A carbon steel plate sheet centralized control, two-layer welding process, reducing the possibility of incomplete penetration.

Mechanical Properties A242 steel:ASTM A242 specification is made for low alloy steel with high strength, it has good atmospheric corrosion resistance, some applications has shown that it has better corrosion resistance than ASTM A36 steel and ASTM A572 Grade 50.Tensile: 70 ksi min (3/4 and under), 67 ksi min (3/4-1.5) 63 ksi min (over 1.5-4)Yield: 50 ksi min (3/4 and under), 46 ksi min (3/4-1.5) 42 ksi min (over 1.5-4)Elongation: 16% min in 8” 19% min in 2” (for plates wider than 24”)

The company is deeply supported and loved by customers with its unique business philosophy and business model. The company has always been adhering to the "credibility first, integrity-based, quality first" purpose, and sincerely serve new and old customers. Over the past twenty years, the company has won the trust of customers by relying on good service and good reputation. Our aftersales team’s main responsibility is to deal with quality feedback and complaints from Customer.