What are the top ten EN steel grade S460ML material plants in Bangladesh

S50C steel plate is a high-quality high-quality medium carbon steel. S stands for steel, which means iron, and 50 stands for carbon content of 0.50%. C represents carbon steel, which means that S50C is a carbon steel with a carbon content of 0.50%.Mechanical properties of S50C steel plate:Tensile strength σb (MPa): ≥630 (64); Yield strength σs (MPa): ≥375 (38); Elongation δ5 (%): ≥14; Reduction of area ψ (%): ≥40; Impact Work Akv (J): ≥31(4); Impact toughness value αkv (J/cm2): ≥39(4)Hardness: unheated, ≤241HB; annealed steel, ≤207HB

Strip steel is mainly divided into hot-rolled ordinary strip steel, cold-rolled ordinary strip steel, hot-rolled high-quality strip steel and cold-rolled high-quality strip steel. The EN steel grade S460ML material, hot-rolled carbon strip steel is made of ordinary carbon structural steel, and is hot-rolled into strip steel with a thickness of 1.80-6.00mm and a width of 50-1200mm. The hot-rolled carbon strip steel is mainly used for the manufacture of cold-rolled billets, cold-formed steel billets, welded steel pipe billets, bicycles, and small hardware products.

"Adopt standard specification: ASTM, JIS, EN, DINCategory: Structural Steel, carbon steel plate, EN steel grade S460ML material, hot rolled plate Carbon steel plate specification: Thickness: 1mm to 200mm; Width: 1500mm to 3500mm: Length: 3000mm to 27000mmThird Party Inspection: ABS, DNV, BV, GL, CCS, LR, RINA, KR, NK, CE, SGS, IKE, IEI or other quality department.

The steel such as EN steel grade S460ML material delivered in the hot-rolled state has a certain degree of corrosion resistance due to the high temperature, so it can be stored in the open air. However, this layer of oxide scale also makes the hot-rolled steel surface rough and the size fluctuates greatly. Therefore, the steel with smooth surface, accurate size and good mechanical properties is required to be produced by using hot-rolled semi-finished products or finished products as raw materials and then cold rolling.