What is SA633 grade E carbon steel plate sheet elastic modulus?

Q370qC, Q370qD, SA633 grade E carbon steel plate sheet and Q370qE are structural steel plates for bridges. It is required to have high strength, toughness and to withstand the load and impact of rolling stock, and have good fatigue resistance, certain low temperature toughness and atmospheric corrosion resistance. The steel for tie-welding bridges should also have good welding performance and low notch sensitivity. Used for the production of riveted and bolt-welded road bridges and railway bridges (including cross-sea bridges).

Steel plate is a plate-shaped steel formed after pouring molten steel. Steel plate is one of the most common forms of steel. With the diversity of market demand, steel plate styles have become diverse, mainly including thick steel plate, thin steel plate, flat steel, etc. Among them, thick steel plate is mainly used in building construction, ship plate, vehicle, boiler, high pressure vessel, oil and gas pipeline, large steel structure, etc. The requirements for bearing capacity of SA633 grade E carbon steel plate sheet, thick steel plate are very high.

SA633 grade E carbon steel plate sheet Tianjin inventory: 7*2920*8200, 15*2992*10185, 40*3050*5800, 14*1950*10700, 50*2500*12000, 20.9*2851*7000, 16*2120*6080, 20*1950*9350, 26*2200*12000, 20*2933*7300, 12.5*2900*11000, 40*3050*4200, 20*1950*9750, 15*2992*10185, 16*2230*7650, 14*2150*8500, 50*2200*12000, 16*2120*6080, 70*2500*12000.

After extrusion, the SA633 grade E carbon steel plate sheet tube shall be removed for sizing. The sizing machine uses a cone-shaped bit to rotate into the steel embryo at high speed to drill holes to form steel pipes. The inner diameter of the steel pipe is determined by the outer diameter length of the drill bit of the sizing machine. After sizing, the steel pipe will enter the cooling tower and be cooled by water spray. After cooling, the steel pipe will be straightened. After straightening, the steel pipe is sent to the metal flaw detector (or hydraulic test) by the conveyor belt for internal flaw detection.