What is the BBNSteel EN steel grade S235JR plates inventory

The company's main business: ship plate, EN steel grade S235JR plates low alloy plate, automobile steel, high-strength plate, pipeline steel, boiler steel plate, weathering plate, wear-resistant plate, bridge plate, pressure vessel plate, steel plate, steel processing, etc. The company takes the implementation of high-end, EN steel grade S235JR plates high-quality, deep processing, strengthening the main business, diversified operation, group operation, enterprise transformation and upgrading as its development strategy, and makes all efforts to be your professional EN steel grade S235JR plates steel supplier and partner.

The qualified flat steel has sufficiently high high temperature strength and high temperature plasticity. Therefore, EN steel grade S235JR plates flat steel is not only required to have high enough normal temperature and instantaneous high temperature tensile strength and plasticity, but also long-term strength and long-term plasticity to ensure long-term safe work at high temperatures, especially under creep leakage conditions. The product thickness is 8-50mm, width 150-625mm, length 5-15m。

Special boiler steel is derived from carbon structural steel. The chemical composition of boiler steel is basically the same as that of high-quality carbon structural steel of the same level, but the EN steel grade S235JR plates steel mechanical property requirements are more strict, especially for impact toughness. And the aging sensitivity is required to be small. The boiler steel should be deoxidized and the non-metallic inclusions should be removed during smelting. The structure should be uniform. The grain size should be controlled in 3-7 grades. The defects such as interlayer, shrinkage, porosity and porosity should be minimized.

Q355GNHE corten steel is characterized by adding a small amount of Cu, P, Cr, Ni and other alloying elements to the steel, so that the steel material forms a dense layer between the rust layer and the substrate with a thickness of about 50 to 100 μm and good adhesion to the substrate metal. The amorphous spinel oxide layer prevents oxygen and water in the atmosphere from penetrating into the steel substrate, slows down the rust development to the steel material, EN steel grade S235JR plates, and greatly improves the steel material's resistance to atmospheric corrosion.

EN steel grade S235JR plates, No.45 seamless pipe belongs to high quality carbon structural steel. The carbon (C) content of No.45 seamless pipe is 0.42 ~ 0.50%, Si content is 0.17 ~ 0.37%, Mn content is 0.50 ~ 0.80%, Cr content is ≤ 0.25%, Ni content is ≤ 0.30%, Cu content is ≤ 0.25%. The tensile strength, yield strength, elongation, reduction of area and impact energy of No.45 seamless pipe are 600 MPa, 355 MPa, 16% and 40% respectively. No.45 seamless pipe is used to manufacture high strength moving parts.

Our company has been established for 20 years and has accumulated rich experience in steel products. At the same time, it is often exported to Southeast Asia, Africa, South America and other countries. So you can rest assured that our EN steel grade S235JR plates products and our prices are very favorable. Because we have our own factory, there is no other cost, we can also carry out machining and so on.

There is a careful, patient, enthusiastic and thoughtful after-sales team, a professional distribution, ultra-efficient warehouse and logistics center, a marketing team with marketing expertise, an innovative technology center with strong steel technology, an experienced manufacturing center with rigorous professionalism Quality Inspection Center, an operation team with many years of administrative management experience. Such a strong combination of teams makes BEBON a steel giant in Henan Province.