What is A633 grade D carbon steel plate sheet equivalent steel material

The company now has A633 grade D carbon steel plate sheet oversea market department, sales and supply department, finance department, logistics department, technical equipment department, quality management department, production department and other departments. The staff with college degree or above accounted for more than 80%, and there were more than A633 grade D carbon steel plate sheet 30 professional and technical personnel. The LSAW pipe production line can produce welded pipes with Φ350-1800mm, wall thickness 6-80mm, and length 2-12m.

The steel such as A633 grade D carbon steel plate sheet delivered in the hot-rolled state has a certain degree of corrosion resistance due to the high temperature, so it can be stored in the open air. However, this layer of oxide scale also makes the hot-rolled steel surface rough and the size fluctuates greatly. Therefore, the steel with smooth surface, accurate size and good mechanical properties is required to be produced by using hot-rolled semi-finished products or finished products as raw materials and then cold rolling.

Q345B material is a low-carbon alloy steel, with good overall performance, low temperature performance, cold stamping performance, welding performance and machinability. Q345R steel is a special plate for pressure vessels with a yield strength of 345MPa. It has good comprehensive mechanical properties and technological performance. In addition to the tensile strength and elongation requirements higher than Q345 (16Mn) steel, Q345R is also required to ensure impact toughness.

In September, China's apparent consumption of crude steel was 94.38 million tons, an increase of 15.58 million tons or 19.8% year-on-year. It has exceeded 90 million tons for five consecutive months. From January to September, China's apparent crude steel consumption was 770 million tons, an increase of 63.14 million tons or 8.9% year-on-year. In terms of growth rate, the apparent consumption of hot-rolled sheet and coated sheet (strip) from January to September increased by more than 40% year-on-year, and the growth rates were 42.6% and 42.0% respectively; railway steel and electrical steel strips fell year-on-year, with a decline. They are 12.8% and 1.4% respectively.